rbtsco / USB2CANLinks
Tiny USB to 8Mbps Flexible-Data CAN (/ AUVCAN) adapter based on the STM32L5 and MCP2562FD
☆10Updated 5 years ago
Alternatives and similar repositories for USB2CAN
Users that are interested in USB2CAN are comparing it to the libraries listed below
Sorting:
- Miniature closed-loop controller for brushless DC motors☆32Updated last year
- SimpleFoc Format Dev. for potential 8pin PWM stepper use w. 4th half-bridge (also 6pin PWM BLDC use w. extra FET driver for eg. brake-res…☆14Updated 2 years ago
- Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!☆84Updated this week
- ☆51Updated 6 years ago
- A USB-C PD Sink up to 20V 5A based on the Cypress CYPD3177 USB PD Controller☆15Updated last year
- ☆30Updated 3 months ago
- ☆35Updated 2 years ago
- CAN bus library for ESP32 and STM32 G431☆36Updated last year
- An STM32F4-based 3D printer control board, designed to be fast, quiet, and compact.☆22Updated 6 years ago
- 2.5kV USB 2.0 Isolator with 200mA Power Supply and Full Speed (12Mbps) Support☆68Updated 3 years ago
- Firmware to support gs_usb on most STM32 devices☆54Updated 5 months ago
- STM32H7B0VBT6 Core Board 280Mhz,128KB ROM,1.4M SRAM☆17Updated 3 years ago
- UCAN is an open source USB-to-CAN interface board, based on STM32F072 and candleLight open source firmware, and supports linux/win/mac mu…☆35Updated 2 years ago
- A dev board based on RaspberryPi RP2040 MCU☆22Updated 4 years ago
- Simple USB-C Power Delivery Tester☆40Updated 3 years ago
- Component Tester in a Keychain☆75Updated 3 years ago
- There are now, a total of 81 hardware electronics on this catalogue for Smart Devices, A.I. enabled. Designed in Kicad, and ready to dow…☆95Updated last year
- Eagle schematics of inverter main board, sensor boards and gate drivers☆79Updated 3 years ago
- Control DC motors using SimpleFOC's infrastructure☆32Updated last year
- EV motor controller with space to have customizable electronics and be easy to repair and build.☆40Updated 3 years ago
- Electronic Dummy Load☆52Updated 3 years ago
- ☆10Updated 4 years ago
- General purpose power controller, capable of driving soldering irons using different voltages and probe types.☆41Updated 2 years ago
- ☆13Updated 5 years ago
- Good RLC meter☆21Updated 2 years ago
- Simple Board that can be used as a Mouse Jiggler, a Rubber Ducky, or a Caps Blocker☆44Updated 2 years ago
- WCH-LinkW is a wired/wireless 2.4G dual imitation real debugger, which can be used for online debugging and downloading of WCH RISC-V a…☆28Updated 2 years ago
- A palm sized MCH (Metal Ceramic Heater) based reflow hotplate powered by USB-PD☆73Updated last year
- ☆11Updated 4 years ago
- STM32H7 Arduino form factor and software compatible board☆36Updated 4 years ago