tuna-f1sh / entreeLinks
Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!
☆83Updated last year
Alternatives and similar repositories for entree
Users that are interested in entree are comparing it to the libraries listed below
Sorting:
- ☆51Updated 6 years ago
- Firmware to support gs_usb on most STM32 devices☆51Updated 3 months ago
- Open source project that uses the CANable hardware from protofusion.org☆43Updated 3 months ago
- Firmware for the CANtact Pro☆48Updated 2 years ago
- gs_usb compatible firmware for candleLight, cantact and canable☆81Updated 4 years ago
- slCAN compatible firmware for STM32f103C8T6☆77Updated 3 years ago
- Firmware for the DieBieMS☆55Updated 4 years ago
- Hardware design files for the CANtact Pro☆76Updated 5 years ago
- Yet another USB-CAN adapter.☆13Updated 3 years ago
- This is project SuperCAN. An open source USB to CAN-FD protocol.☆91Updated 4 months ago
- ☆67Updated 10 years ago
- This is an Open Source Hardware USB to CAN-FD Interface☆75Updated last week
- Command-line tool to flashing devices by CAN-BUS☆89Updated 6 years ago
- High performance CAN-USB/CAN-UART adapter + UAVCAN devboard☆37Updated 3 months ago
- STM32 CAN-bus bootloader☆79Updated 9 years ago
- Main firmware of the Huebner inverter project☆181Updated 5 months ago
- slcan firmware for the CVRA CAN to USB dongle☆37Updated 4 years ago
- CAN bus gateway over USB☆21Updated 4 years ago
- Inverter for brushless motors☆63Updated 7 years ago
- USB2CANFDV1, 1500V ISO, 5Mbps Max☆70Updated last year
- Module for ONSEMI FUSB302-D (USB-C Controller) for PD negotiation using STM32 HAL☆18Updated 5 years ago
- A CANopen protocol for all systems such as embedded, PC, etc.☆118Updated this week
- STM32 USB device bootloader using DFU class interface☆103Updated 11 months ago
- stm32duino CAN Library for the STM32F103 aka Blue Pill☆86Updated 2 years ago
- The DieBieMSTool can be used to configure the DieBieMS. More documentation will follow.☆36Updated 6 years ago
- This Yet Another Bootloader (YAB) is for STM32, STM32F103, STM32F407, STM32L433, STM32F723, STLINK-V3, STLINK-V3MINI, CMSIS-DAP.☆88Updated 4 years ago
- BUSMASTER is an Open Source Software tool to simulate, analyze and test data bus systems such as CAN. BUSMASTER was conceptualized, desig…☆40Updated 5 years ago
- UAVCAN for STM32 Arduino☆42Updated 5 years ago
- USB CAN-FD interface based on the STM32G0 that works well with gs_usb on Linux☆47Updated 2 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆72Updated 6 years ago