Alternatives and similar repositories for candleLightFD

Users that are interested in candleLightFD are comparing it to the libraries listed below

• ryedwards / budgetcan-fw
  Firmware to support gs_usb on most STM32 devices
  ☆41Updated last month
• tuna-f1sh / entree
  Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!
  ☆79Updated last year
• IntergatedCircuits / CanDybugFW
  CAN bus gateway over USB
  ☆21Updated 3 years ago
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆64Updated 2 months ago
• walmis / stm32-slcan
  slCAN compatible firmware for STM32f103C8T6
  ☆70Updated 3 years ago
• WeActStudio / WeActStudio.USB2CANFDV1
  USB2CANFDV1, 1500V ISO, 5Mbps Max
  ☆46Updated 9 months ago
• suburbanembedded / hadoucan-fw
  Firmware for SM-1301 USB-CAN FD adapter
  ☆26Updated last month
• UsbCANConverter-UCCbasic / UCCB_GS_Embedded
  gsusb firmware for USB CAN converter
  ☆14Updated 3 years ago
• jgressmann / supercan
  This is project SuperCAN. An open source USB to CAN-FD protocol.
  ☆82Updated last month
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆38Updated 5 years ago
• ucandevices / CFDC_embedded
  Embedded code and PCB for CAN FD to USB converter
  ☆14Updated last year
• cvra / CAN-USB-dongle-fw
  slcan firmware for the CVRA CAN to USB dongle
  ☆37Updated 4 years ago
• SimonCahill / isotp-c
  An implementation of the ISO-TP (ISO15765-2) CAN protocol in C
  ☆34Updated 3 weeks ago
• ErichStyger / McuLink-Mini
  Version of the NXP MCU-Link Debug CMSIS-DAP Debug Probe.
  ☆24Updated last year
• Jana-Marie / stm32g4xx_usb_cdc
  STM32G474 USB CDC example implementation, combined with Jan Breuer's SCPI parser library v2
  ☆27Updated 2 years ago
• davefiddes / c2000-inverter
  Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.
  ☆15Updated 2 years ago
• dragonlock2 / zephyrboards
  Zephyr RTOS board definitions for extra boards
  ☆15Updated 8 months ago
• linklayer / cantact-pro-fw
  Firmware for the CANtact Pro
  ☆47Updated 2 years ago
• normaldotcom / candleLight_fw
  gs_usb compatible firmware for candleLight, cantact and canable
  ☆69Updated 3 years ago
• vladisenko / USB-CAN
  Yet another USB-CAN adapter.
  ☆12Updated 3 years ago
• roboterclubaachen / micro-motor
  µMotor miniature motor controller
  ☆37Updated 2 months ago
• CYMOTIVE / CYMOCAN
  Low cost USB to CAN-FD (Controller Area Network - Flexible Data rate) interface.
  ☆18Updated last year
• mnemocron / STM32_PatternDriver
  STM32F103 @ 64MHz produces a periodic 2MHz bit pattern on multiple GPIOs (using TIM, DMA, GPIO)
  ☆26Updated 3 years ago
• l3VGV / cordic_atan2
  cordic atan2 for stm32
  ☆11Updated 4 years ago
• DanielMartensson / GoobySoft
  General software for logging and controlling devices. Controlling Modbus, CAN bus via STM32PLC etc
  ☆34Updated last week
• STMicroelectronics / cmsis-device-f7
  Provides the STM32Cube MCU Component "cmsis_device_f7" of the STM32F7 series.
  ☆12Updated 11 months ago
• lupyuen / qfplib
  ARM Cortex-M0 floating-point library in 1 kbyte. From http://www.quinapalus.com/qfplib.html
  ☆27Updated 6 years ago
• pierremolinaro / canfd-plugin-for-saleae-logic-analyzer
  CANFD Plugin for Saleae Logic Analyzer
  ☆30Updated 8 months ago
• Fescron / universal-jlink-adapter
  20 pin SWD/JTAG J-Link to 10 pin (0.1" and 0.05") reconfigurable Cortex-M header with power supply and TagConnect compatibility, as well …
  ☆76Updated last month
• farpatch / farpatch
  Farpatch debugger software layer, backed by Black Magic
  ☆50Updated 2 months ago