Alternatives and similar repositories for rpi5-rp1-spi:

Users that are interested in rpi5-rp1-spi are comparing it to the libraries listed below

• adamgreen / QuadratureDecoder
  QuadratureDecoder - PIO based Encoder Library for the RP2040
  ☆38Updated 3 years ago
• essele / kicad_jlcpcba
  KiCad pluging to create BOM and Placement files for JLCPCB's PCBA service
  ☆18Updated 4 years ago
• 30350n / free2ki
  FreeCAD to KiCad 3D model exporter
  ☆43Updated last month
• praktronics / rpi5-rp1-gpio
  Tests on using the PCI->RP1 direct register access to use GPIO pins and other peripherals
  ☆11Updated last year
• ebenolson / kicad-plugin-arrange-like-schematic
  Kicad plugin to lay out components as they are in the schematic
  ☆25Updated 6 years ago
• machdyne / pnp
  Open-Source Pick and Place Machines
  ☆16Updated 6 months ago
• will127534 / PCIe3_Hub
  A opensource PCIe 3.0 Hub design based on ASM2806 with Raspberry Pi 5's PCIe FPC connector design
  ☆53Updated 4 months ago
• tinkerbeast / PicoSigGen
  PicoSigGen - Low cost arbitrary waveform generator
  ☆31Updated last year
• Peter-van-Tol / LITEXCNC-HUB75HAT
  A PCB that turns the Colorlight 5A-75B into an easy to use LinuxCNC motion controller
  ☆11Updated last year
• Jana-Marie / temperature-logger
  Anotter USB temperature logger that can record up to four channels with thermocouple or NTCs connected via CDC directly or SCPI to USB.
  ☆61Updated last year
• hansfbaier / ch569-usb3-board
  USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569
  ☆26Updated 2 years ago
• mwelling / rp2040-pmod
  RP2040 MCU based PMOD
  ☆20Updated 4 months ago
• MichaelBell / rp1-hacking
  ☆19Updated last year
• mobilinkd / stm-morpho-template
  KiCad Template for STM32 Nucleo-64 Expansion Boards
  ☆34Updated 4 years ago
• tinfever / KiCAD-Custom-DRC-Rules-for-JLCPCB-with-Unit-Tests
  Comprehensive KiCAD Custom Rules for JLCPCB 4-layer service. Including PASS/FAIL test PCB examples for each rule.
  ☆26Updated last year
• OneKiwiTech / kicad-length-matching
  Track Length Calculator
  ☆24Updated 11 months ago
• CRImier / NGFF
  M.2 NGFF接口标准
  ☆23Updated 2 years ago
• azonenberg / voltage-divider-calculator
  Tool for selecting voltage divider components given constraints and a list of available resistors
  ☆31Updated 2 years ago
• jjsch-dev / pico_i2c_sniffer
  i2c sniffer with a Raspberry Pi Pico
  ☆77Updated 3 years ago
• meatpiHQ / meatpi_ollie_v2
  ☆35Updated last year
• MitkoDyakov / Calipatron
  I design my own digital caliper based on STM32F103C8T6 blue pill.
  ☆30Updated 5 months ago
• linux-automation / candleLightFD
  USB CAN-FD interface based on the STM32G0 that works well with gs_usb on Linux
  ☆19Updated last year
• QuickLogic-Corp / qomu-dev-board
  100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain
  ☆36Updated 4 years ago
• msvisser / panelize-plugin
  Automatic KiCad panelization plugin
  ☆56Updated 3 years ago
• jbtronics / DS1054_BodePlotter
  A Python program that plots Bode diagrams of a component using a Rigol DS1054Z and a JDS6600
  ☆37Updated 4 years ago
• elektronomikon / raspi_gpib_shield
  A GPIB shield for the raspberry pi
  ☆34Updated 3 years ago
• devbisme / WireIt
  KiCad PCBNEW plugin that lets you add wires between pads on a PCB, delete them, and swap wires between pads.
  ☆84Updated last month
• marcoreps / laser_driver
  Energy efficient constant current diode laser driver
  ☆42Updated 6 years ago
• esden / KiBus
  KiCad bus length matching script.
  ☆30Updated 9 months ago
• gsuberland / jlcpcb_autogenerated_stackups
  Script for extracting stackup templates from JLCPCB and turning them into Altium and KiCAD stackup files
  ☆42Updated 3 weeks ago