newdexterity / Airship
A Low-Cost, Open-Source, Robotic Airship for Education and Research
☆49Updated 3 years ago
Related projects ⓘ
Alternatives and complementary repositories for Airship
- Hardware and Software for an Open Source Robotic Leg☆78Updated last year
- ROS project for Robaka - mobile ROS testbed☆71Updated 2 years ago
- Software for making the drone show with 🍀☆76Updated last month
- MABEL is a feature-packed, open-source, legged balancing robot based off of the Boston Dynamics Handle robot.☆157Updated 4 years ago
- ☆195Updated 7 months ago
- ROS hardware driver for UART-controlled hoverboard☆97Updated 4 months ago
- Differential Driving Robot with ESP32 and ODrive running micro-ROS☆11Updated 3 years ago
- ☆12Updated 3 years ago
- ☆48Updated 6 years ago
- Self-balancing robot using hoverboard hub motors☆107Updated 2 years ago
- ☆32Updated 2 years ago
- SCUTTLE™: Sensing, Connected, Utility Transport Taxi for Level Environments [An open-source Mobile Robot]☆77Updated 7 months ago
- 2017 NimbRo-OP2 hardware release☆47Updated 6 years ago
- SpryDrive is an affordable actuator based on the quasi-direct drive (QDD) scheme. It is composed of a brushless outrunner motor, a low-co…☆36Updated 3 years ago
- ROS-based framework and RPi image to control PX4-powered drones 🍀☆415Updated last week
- ☆71Updated 4 years ago
- This is a ROS 2 & Micro-ROS project to control an RC tank with differential drive (skid steering) with an ESP32-CAM module.☆63Updated last year
- MORPH : Modular Open Robotics Platform for Hackers☆44Updated 5 years ago
- A clear ArduPilot configuration sequence☆41Updated this week
- An open-source 3D-printed quadrupedal robot. Intuitive gait generation through 12-DOF Bezier Curves. Full 6-axis body pose manipulation. …☆365Updated 2 months ago
- Set up ROS, OpenCV and other ROSbots modules for your ROBbots robot☆98Updated 5 years ago
- Open-source drive for brushless motors, following the open dynamic robot initiative☆81Updated this week
- A 7 dof prothesis robotic arm.☆67Updated 5 years ago
- RoboDog V2☆35Updated 4 years ago
- Dexter Development Environment☆44Updated 3 months ago
- Hardware and Firmware of the Solo Quadruped Master Board☆120Updated 3 weeks ago
- Here is everything you need to know about POPI, our open-source quadruped robot. If you want to check the videos we will release about it…☆107Updated 3 years ago
- UAV Autonomous Systems Management☆176Updated 2 years ago
- This my 3d printed robot arm project☆99Updated 4 months ago
- Firmware for the ROSflight autopilot☆135Updated this week