neilsheps / overkill-xiaoxiang-jbd-bms-ble-readerLinks
Read Xiaoxiang BMS data through BLE on Adafruit nrf52 devices
☆23Updated 2 years ago
Alternatives and similar repositories for overkill-xiaoxiang-jbd-bms-ble-reader
Users that are interested in overkill-xiaoxiang-jbd-bms-ble-reader are comparing it to the libraries listed below
Sorting:
- Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy☆114Updated last year
- Read and Write Library for Overkill Solar BMSs☆19Updated 3 years ago
- ☆30Updated 3 years ago
- Contains an Arduino project for Espressif ESP32 that will run a web server with web sockets to display data from a Victron MPPT charge co…☆28Updated 5 years ago
- ☆18Updated 3 years ago
- Converts the JK-BMS RS485 data to Pylontech CAN data☆91Updated 5 months ago
- Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…☆130Updated 4 years ago
- ESPHome component to monitor and control a ANT-BMS via UART☆62Updated last month
- ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE☆177Updated 3 weeks ago
- JBD BMS and Thornwave bluetooth data monitoring☆48Updated 3 years ago
- Read data from victron mppt and transport to mqtt server☆42Updated 3 years ago
- Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485☆80Updated 2 years ago
- Device to measure energy and temperature☆80Updated 6 years ago
- JK BMS to PYLON CANBUS Protocol converter☆37Updated 2 years ago
- Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32☆13Updated 4 months ago
- ☆62Updated 6 years ago
- Get readings from the Bluetooth Smart BMS from https://www.lithiumbatterypcb.com/ in FHEM☆14Updated 3 years ago
- ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems☆172Updated 3 weeks ago
- JBD BMS Linux utility☆66Updated 3 months ago
- Support files for managing and deploying my Victron Venus OS stuff☆20Updated 5 years ago
- ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).☆33Updated last year
- A very flexible ESP32 power meter / energy meter with SCT-013-0x0, ZMPT101B, ACS712 sensors☆43Updated last year
- Lightweight arduino library to read basic data using the VE.Direct protocol from Victron Energy☆12Updated 5 years ago
- This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…☆74Updated last year
- Just the Arduino Library for Overkill Solar BMSs☆37Updated 3 years ago
- Program for reading data from a Xiaoxiang smart BMS and printing to an OLED display☆21Updated 5 years ago
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆92Updated 2 months ago
- Connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266/ESP32 and monitor using Blynk /Homeassistant/MQTT... .☆56Updated 11 months ago
- Python module for Daly BMS devices☆102Updated last year
- An arduino sketch to connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266 and monitor using the Blynk mobile app - …☆60Updated 4 years ago