syssi / esphome-jbd-bms
ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
☆117Updated this week
Related projects ⓘ
Alternatives and complementary repositories for esphome-jbd-bms
- ESPHome component to monitor and control a pipsolar inverter via RS232☆103Updated last month
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆170Updated last month
- Add-on for Home Assistant to connect JK, JBD, Daly, ANT, SOK and Supervolt BMS via Bluetooth☆309Updated 2 months ago
- ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485☆68Updated last month
- ☆93Updated 2 weeks ago
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆12Updated last month
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆80Updated last month
- JBD BMS and Thornwave bluetooth data monitoring☆43Updated 2 years ago
- Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy☆99Updated 2 months ago
- Yet another multi-BMS Merging Solution☆36Updated this week
- ☆58Updated 2 years ago
- ESP8266 based WiFi and MQTT interface for MPPT Inverters that use watchpower☆169Updated last week
- ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems☆149Updated 2 weeks ago
- Read data From Seplos BMS and send them to the Home Assistant☆40Updated last year
- ESPHome configuration to monitor and control a ISolar/EASUN SMG II inverter via RS232☆66Updated this week
- Adding WiFi monitoring to US2000B and US2000C batteries.☆133Updated 2 years ago
- ☆27Updated 4 months ago
- ESPHome component to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE☆483Updated last month
- Little Program for ESP82XX to get the Victron data to web and MQTT☆50Updated 3 weeks ago
- JBD BMS Linux utility☆50Updated 6 months ago
- ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)☆36Updated 2 months ago
- SmartShunt ve.direct to ESPHOME node☆70Updated last year
- JK BMS to PYLON CANBUS Protocol converter☆33Updated 2 years ago
- ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v1…☆24Updated this week
- Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.☆187Updated this week
- ESPHome component to monitor and control some Atorch meters via bluetooth☆64Updated 3 weeks ago
- ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).☆29Updated 11 months ago
- Der Esp8266 ist über ein Rs485 Modul mit dem Soyosource 1200 verbunden und kann diesem die Leistungswerte senden. ManualMode: Der Leistun…☆154Updated 8 months ago
- ☆13Updated 2 years ago
- Firmware battery safety controller (BSC)☆104Updated this week