Alternatives and similar repositories for ZED-F9P_Raw_Data_Logger

Users that are interested in ZED-F9P_Raw_Data_Logger are comparing it to the libraries listed below

• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆61Updated last year
• fguiet / gnss-rtk
  My own RTK network
  ☆25Updated last year
• mtz8302 / AOG_Autosteer_ESP32
  AgOpenGPS V5 + V4 autosteer code for ESP32
  ☆11Updated 2 years ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• Erensu / cors
  Continuously Operating Reference Stations (CORS), provide network RTK differential service.
  ☆29Updated 4 months ago
• rokubun / gnss_tools
  Docker that encapsulates various GNSS processing tools
  ☆20Updated 3 years ago
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆95Updated 6 years ago
• FlyTheThings / uNavINS
  ☆45Updated 7 years ago
• DoubleString / VrsCaster
  Caster based on rtklib 2.4.3,including self-defined vrs mode
  ☆20Updated 5 years ago
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆22Updated last year
• vasimv / rtkzedf9p
  Simple utility to enable internal RTK mode in Ublox ZED-F9P GPS receiver with RTKLIB-compatible output
  ☆14Updated 6 years ago
• CentipedeRTK / pi-gen_RTKbase
  fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images
  ☆23Updated 11 months ago
• Archfx / RTK-NTRIP-RTCM
  Contains program to Send RTCM3 📡 data to Hosted NTRIP server and fetch NTRIP data and display on another rover. Real time kinematic supp…
  ☆28Updated 2 years ago
• tyler123durden / rtklib
  RTKLIB modifications for embedded systems
  ☆18Updated 12 years ago
• VimDrones / open-rtk
  open source rtk base
  ☆13Updated 5 years ago
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 3 years ago
• ethz-asl / rtklibros
  rtklib with ros interfacing and adapted feedback from external Kalman filter
  ☆48Updated 9 years ago
• Aceinna / rtklib_aceinna
  A version of RTKLIB optimized for single and dual frequency low cost GPS receivers, especially u-blox receivers. It is based on RTKLIB 2…
  ☆15Updated 4 years ago
• slgrobotics / Esp32_RTK_BaseStation
  Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster
  ☆32Updated 3 years ago
• jcmb / NTRIP
  NTRIP, VRS, IBSS Tools
  ☆45Updated last month
• charlesquick / ntripcaster-containerised
  Another containerised ntripcaster!
  ☆21Updated 11 months ago
• u-blox / ublox-C099_F9P-uCS
  ☆61Updated 5 years ago
• Azurehappen / Virtual-Network-DGNSS-Project
  A virtual network Differential GNSS server-client project using Precise Point Positioning (PPP). Global coverage. Without the needs for p…
  ☆38Updated last year
• TakahashiJinxu / ublox2rinex
  an ROS package to convert the GNSS raw measurements from topic "/ublox_gps_node/rxmraw" in ROS bag to RINEX file. tested on California pa…
  ☆27Updated 3 years ago
• MrBourriz / GNSS-INS-Processing
  An open-source workflow for GNSS/INS Processing
  ☆21Updated last year
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆55Updated 2 years ago
• jangleboom / RTKBaseStation
  Real time kinematics base station (ESP32 + ZED-F9P)
  ☆39Updated 2 years ago
• mtz8302 / AOG_GPS_ESP32
  DUAL or SINGLE GPS bridge between AgOpenGPS an GPS receiver. Works with 2 UBlox to calculate heading+roll. Corrects and filters. ESP32 + …
  ☆41Updated 2 years ago
• stephendade / apsync-Kakute
  Companion Computer software installer for the KakutePi board and APM
  ☆24Updated 5 years ago
• davwys / esp32-mavlink-sim
  Simulate MAVLink commands for use with groundstation apps on an ESP32
  ☆15Updated 5 years ago