Alternatives and similar repositories for MeteorRadiometer

Users that are interested in MeteorRadiometer are comparing it to the libraries listed below

• TomasTT7 / LoRa_SSDV
  LoRa based high altitude balloon transmitter/receiver system with SSDV.
  ☆10Updated 5 years ago
• kaktus85 / MightyWattR3
  Resources for MightyWatt R3 electronic load
  ☆31Updated last month
• dilshan / usb-external-display
  USB 10 digit seven segment display unit
  ☆14Updated 5 years ago
• swharden / USB-Counter
  Open-source USB frequency counter
  ☆24Updated last year
• pu2clr / BFO
  Simple BFO with Si5351A controlled by Arduino
  ☆12Updated 4 years ago
• joseluu / D6_firmware
  Firmware for the D6 Simple spectrum analyzer with tracking source (T.G.)
  ☆24Updated 5 years ago
• dilshan / arduino-superhet
  Si5351 and Arduino based superheterodyne receiver
  ☆37Updated 3 years ago
• openlux / microlux
  microlux - an open source CMOS camera for astrophotography and autoguiding
  ☆20Updated 6 years ago
• jgromes / LoRenz
  Arduino shield for various LoRa communication modules
  ☆14Updated 8 years ago
• technoblogy / frequency-probe
  A handheld tool that gives a visual indication of the frequency or voltage at the probe.
  ☆25Updated 4 years ago
• TomasTT7 / TT7F-Float-Tracker
  Eagle files and current software for TT7F high altitude balloon tracker.
  ☆12Updated 7 years ago
• F4GOJ / AD9850SPI
  AD9850 SPI library for arduino
  ☆23Updated 2 years ago
• bg2bhc / uw3di_3d
  ☆14Updated 3 years ago
• profdc9 / RFNoiseSource
  A RF noise source with about 2 GHz bandwidth
  ☆9Updated 5 years ago
• etherkit / OpenBeacon2
  Multimode MEPT based on OpenBeacon
  ☆15Updated 4 years ago
• TheHWcave / GPIB-to-USB
  GPIB-to-USB interface (Arduino Nano) and GPIB logger (Python)
  ☆21Updated 6 years ago
• sh123 / antenna_analyzer_vna
  Pocket Arduino Nano based graphical SWR 160-6m bands panoramic VNA antenna analyzer based on AD9850, AD8302 and SGA3386
  ☆22Updated 2 years ago
• etherkit / Si5351ABreakoutBoard
  Hardware design files for the Si5351A Breakout Board
  ☆23Updated 4 years ago
• biemster / si5351_antenna_analyser
  Si5351 based antenna analyser using ESP32 or Arduino
  ☆12Updated 6 years ago
• circuitvalley / trueposition_gpsdo_usb_oled
  Open Source 10Mhz Isolated Distribution Amplifier. PIC18F25K50 TruePosition GPSDO Controller Firmware with USB and OLED Display.
  ☆17Updated 3 years ago
• RobTillaart / AD985X
  Arduino library for AD9850 and AD9851 function generators.
  ☆13Updated last month
• Galvant / gpibusb-documentation
  Documentation files for GPIBUSB
  ☆22Updated 10 years ago
• adafruit / Adafruit_Si5351_Library
  Driver for Adafruit's Si5351 Clockgen Breakout
  ☆44Updated last year
• MR-DOS / MWGEN-G1
  12.5 MHz - 6400 MHz (LMX2572) or even up to 20 GHz (LMX2595) generator board with int./ext. reference.
  ☆15Updated 3 years ago
• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆21Updated 6 years ago
• techie66 / CANSerial
  Serial port emulation over CAN bus
  ☆30Updated 2 years ago
• CGrassin / hairpin_filter
  Hairpin filter generator and openEMS model.
  ☆20Updated 4 years ago
• pu2clr / auto_bpf_arduino
  Auto Band Pass Filter controlled by Arduino
  ☆20Updated 3 years ago
• szigix / YATPGPSDO
  Yet Another TruePosition GPSDO
  ☆15Updated 3 years ago
• Juan-Gg / Linear-lab-bench-power-supply
  This is a dual channel linear lab power supply, each one capable of 30 V at 500 mA.
  ☆13Updated 6 years ago