liamhays / rk3566-mcuLinks
Reverse engineering, notes, and example code for the RISC-V MCU inside the RK3566 SoC
☆35Updated last year
Alternatives and similar repositories for rk3566-mcu
Users that are interested in rk3566-mcu are comparing it to the libraries listed below
Sorting:
- Opensource embedded controller firmware for sipeed boards.☆40Updated 6 years ago
- Patches include sunxi platform support and various driver fixes☆82Updated 6 months ago
- Patches include sunxi platform support and various driver fixes☆42Updated 4 months ago
- OpenOCD source code for CH32V series MCUs released by Mounriver IDE☆55Updated 3 years ago
- SDK sch&layout reference design and datasheet documention☆63Updated last year
- ☆130Updated last year
- Via Labs 805/806☆34Updated 2 years ago
- Decompiled DDR memory init for Allwinner Tech T113-s3 SoC☆11Updated 3 years ago
- M1s_BL808_Linux_SDK☆31Updated 2 years ago
- WinChipHead CH341 linux driver for I2C, SPI and GPIO mode☆91Updated 3 months ago
- Datasheets of Ingenic SoCs. Distribute as you want!☆18Updated 10 months ago
- ☆68Updated 5 months ago
- HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…☆82Updated 2 years ago
- Datasheets and Reference Manual for BL602/BL808☆151Updated 2 years ago
- L4：Cortex A5 GSM SoC RDA8810☆25Updated 6 years ago
- Bare metal programming on the EBAZ4205 board with Zynq XC7Z010 SoC☆18Updated 7 months ago
- AGM bitstream utilities and decoded files from Supra☆43Updated last year
- ☆43Updated 4 years ago
- Apache NuttX RTOS on 64-bit RISC-V Sophgo SG2000 (T-Head C906 / Milk-V Duo S)☆37Updated this week
- OpenBouffalo Firmware Repository☆36Updated 2 years ago
- USB-Blaster instance on CH55x MCU.☆50Updated 6 years ago
- A modern port of OpenOCD to WCH-Link RISC-V (see project wiki)☆22Updated 3 years ago
- This is the OpenOCD source code modified to support WCHlink and CH32Vxxx MCUs, received from MounRiver after my GPL request, and publishe…☆18Updated 2 years ago
- RV-Debugger-BL702 Project, an opensource debugger implement☆203Updated 9 months ago
- Run an executable from RAM on a Bouffalo MCU (BL602 or BL808)☆22Updated 2 years ago
- Chip support package for Cypress EZ-USB FX2 series microcontrollers☆80Updated 6 months ago
- USB2Sniffer: High Speed USB 2.0 capture (for LambdaConcept USB2Sniffer hardware)☆55Updated 5 years ago
- Open Source Hardware JTAG/SWD/UART/SWO interface board☆35Updated last year
- SyterKit is a baremetal framework, As bootloader, MPU framework, Running on SRAM☆121Updated 2 weeks ago
- Opensource toolchain for BL602/BL604, BL702/BL704/BL706, BL616/BL618, BL808 and other series of RISC-V based chips from Bouffalo Lab☆24Updated 8 months ago