kriswiner / MMC5983MALinks
Arduino sketch for 10 DoF AHRS using the MMC5983MA magnetometer
☆12Updated 5 years ago
Alternatives and similar repositories for MMC5983MA
Users that are interested in MMC5983MA are comparing it to the libraries listed below
Sorting:
- Test sketches and information to use the improved USFSMAX Module with MMC5983 magnetometer☆16Updated 3 years ago
- ☆15Updated 3 years ago
- An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface☆92Updated 2 months ago
- ICM-20948 port of the MPU-9250 Kris Winer Arduino library☆43Updated 3 years ago
- The OpenLog Artemis is an open source datalogger the comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure…☆98Updated last month
- Mahony 3D fusion filter and tilt compensated compass, with sensor calibration code☆53Updated last year
- OpenIMU - Open Hardware Mini Logger based on ESP32☆43Updated 3 years ago
- Navigation filters, transforms, and utilities☆15Updated 2 years ago
- ☆50Updated 7 years ago
- Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.☆102Updated 2 weeks ago
- Arduino and CMake library for communicating with uBlox GPS receivers.☆113Updated last year
- C++ Arduino sketch with quaternion output☆21Updated 5 years ago
- STM32 library with DMA support for u-blox devices supporting Global Navigation Satellite Systems and UBX standard. Successfully tested on…☆78Updated 4 years ago
- Quaternion-Based Extended Kalman Filter for Fixed-Wing UAV Attitude Estimation☆106Updated 6 years ago
- Custom device tree layover and python firmware control script for the 4 channel ADC tlv320adc6140. Allows a raspberry pi to create conti…☆20Updated 3 years ago
- Motion Sensor Calibration Tool☆93Updated 5 years ago
- ☆10Updated 6 years ago
- u-blox GNSS receiver library light weight for low power tracking application☆26Updated 5 years ago
- C Sensor API for the BMP3xy series of Barometers from Bosch Sensortec. To report issues, go to https://community.bosch-sensortec.com/t5/B…☆79Updated 3 years ago
- Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules☆147Updated 4 years ago
- A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.☆59Updated 2 years ago
- ☆56Updated 6 years ago
- 9-dof, 10-dof and 11-dof IMU fusion library for Linux systems (development version)☆92Updated 3 years ago
- The new filter with comparism to the well-known methods☆19Updated last year
- using stm32f4-discovery with SX1262 for voice☆35Updated last year
- Driver for SiLabs Si4463☆38Updated 3 years ago
- A simple SX1303 based LoRa Gateway for FeatherWing ecosystem.☆25Updated 4 years ago
- C-Implementation of an Extended Kalman Filter for use in embedded applications☆97Updated 10 years ago
- C++ Interface for the Bosch-Sensortec's BNO055 compatible with Espressif's ESP32 SoC running esp-idf.☆27Updated last year
- ESP32 high-speed flash data logger for IMU (accelerometer+gyro+magnetometer), GPS, pressure sensor readings.☆22Updated 5 years ago