sparkfun / Qwiic_IMU_BNO080Links
The BNO080/BNO085 IMU has a combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running powerful algorithms.
☆31Updated last year
Alternatives and similar repositories for Qwiic_IMU_BNO080
Users that are interested in Qwiic_IMU_BNO080 are comparing it to the libraries listed below
Sorting:
- An Arduino Library for the BNO080 IMU combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running pow…☆87Updated last year
- Arduino sketch for BNO080 9DOF with sensor fusion☆55Updated 3 years ago
- Demo code showing how to interface with BNO080 (or FSP200) using an STM32F411 Nucleo dev board.☆36Updated last year
- 9 DoF sensor fusion with AHRS output for MPU-6050 gyro/accel + HMC5883 magnetometer sensor☆30Updated 3 years ago
- RTIMULib makes it easy to use 9-dof IMUs with embedded Linux systems (especially the Raspberry PI!)☆48Updated 4 years ago
- Simple Kalman filter library for Arduino☆20Updated 6 years ago
- The ICM20948 is the next IMU in the lineup from Invensense, following the MPU-9250☆18Updated 4 years ago
- Arduino library for ICM20X☆17Updated last year
- Arduino library for scientific sensor readings/fusions/manipulations☆35Updated 10 months ago
- Teensiduino sketch for 9-axis BNO055 motion sensor + MS5637 pressure sensor☆56Updated 9 years ago
- C++ Arduino sketch with quaternion output☆21Updated 4 years ago
- Arduino library for the LSM6DS3☆57Updated 2 years ago
- Driver code for Hillcrest BNO080 and SH-2 sensor hubs.☆26Updated 2 years ago
- Motion Sensor Calibration Tool☆79Updated 5 years ago
- MPU-9250 SPI Library for Arduino/Teensy☆64Updated 8 years ago
- An Arduino Library for compass tilt compensation and hard iron offset☆38Updated 9 years ago
- ☆60Updated 8 years ago
- Invensense 20948 chip working with DMP code for Arduino environment☆43Updated 5 years ago
- ICM-20948 port of the MPU-9250 Kris Winer Arduino library☆37Updated 3 years ago
- OpenIMU - Open Hardware Mini Logger based on ESP32☆42Updated 2 years ago
- Mahony 3D fusion filter and tilt compensated compass, with sensor calibration code☆49Updated last year
- Library for MPU9250 9-axis orientation sensor with use of DMP.☆11Updated 9 years ago
- Commandline program for reading a Hillcrest Labs Bosch BNO080 IMU sensor over I2C under Linux☆17Updated 5 years ago
- Arduino library to support the LSM6DS3 3D accelerometer and 3D gyroscope☆22Updated 3 years ago
- A proof-of-concept messy implementation of OV2640 picture grabbing on a STM32 MCU without using the hardware DCMI interface.☆23Updated 6 years ago
- Teensy3.6 based flight control firmware☆25Updated 5 years ago
- Arduino library for BNO08x☆53Updated last year
- ☆27Updated 7 years ago
- Neato XV-11 LIDAR connected to an STM32F429IDISCOVERY board for 360-degree range scanning and measurement☆41Updated 10 years ago
- NXP Motion Sensors for Teensy and Arduino☆71Updated last year