Alternatives and similar repositories for fan-daemon

Users that are interested in fan-daemon are comparing it to the libraries listed below

• XRobots / ROSremote
  ☆35Updated 3 years ago
• gtjoseph / jetson-nano-support
  ☆33Updated 6 years ago
• GAVLab / ros_bno08x
  ☆14Updated 2 years ago
• Duet3D / CANlib
  CAN message buffer and protocol library for Duet 3
  ☆11Updated 2 weeks ago
• nahueltaibo / rovertracksv2
  Source code of project rover tracks: https://www.thingiverse.com/thing:3112734
  ☆11Updated 7 years ago
• Saeterncj / QuadratureEncoder
  Arduino Quadrature Encoder
  ☆17Updated 6 years ago
• madelinegannon / jetson-nano-accessories
  A variety of 3D printed mounts, adapters, and kits for NVIDIA's Jetson Nano.
  ☆151Updated 6 years ago
• Circuito-io / LaserCat
  ☆16Updated 7 years ago
• Wim3d / Blinds_control
  ☆14Updated 4 years ago
• 9zigen / esp8266-a6211-led-driver
  esp8266 + A6211 up to 48v multichannel led driver
  ☆10Updated 4 years ago
• keeeal / n-dof
  ☆15Updated 5 years ago
• 2788west / cerusbot
  ☆16Updated last year
• stevej52 / jetnano_joysticks
  Jetson Nano control and vision with ROS2 RealSense2, RPlidar, BNO055, Python, Pygame and ModBus
  ☆12Updated 4 years ago
• wheelbot-tech / My_Gripper
  3d printed wifi gripper , MoveIt2, micro-ROS , esp32
  ☆12Updated 2 years ago
• likeablob / mini-media-control-bar
  A tiny media control bar based on ESPHome.
  ☆26Updated 9 months ago
• FunPythonEC / uPy-rosserial
  An implementation of rosserial for uPy.
  ☆21Updated 4 years ago
• process1183 / roomba-rpi
  iRobot Roomba 690 enhanced with a Raspberry Pi Zero 2W and IMU
  ☆36Updated 3 years ago
• avtehnik / gt2-gear-genaretor
  ☆37Updated 3 years ago
• rosmo-robot / Rosmo_3D
  3D printing and design files
  ☆17Updated 2 years ago
• opensensinglab / tfmini
  An Arduino driver for the Benewake TFMini time-of-flight distance sensor
  ☆37Updated 3 years ago
• mrjadkowski / SMARS-mini-XL
  A small wheeled or tracked robot running on Circuit Python
  ☆19Updated 4 years ago
• osnava / learnJetson
  Learning to use this device. You'll find edge AI applications and useful commands to optimize your Jetson
  ☆54Updated 2 months ago
• roundsToThree / Camsense-X1-Previewer
  An app to preview incoming data from the Camsense® X1 LIDAR Scanner.
  ☆13Updated 5 years ago
• jetsonhacks / camera-caps
  Examine the camera capabilities for V4l2 cameras
  ☆50Updated last year
• scuttlerobot / SCUTTLE
  SCUTTLE™: Sensing, Connected, Utility Transport Taxi for Level Environments [An open-source Mobile Robot]
  ☆87Updated 3 weeks ago
• hoverboard-robotics / hoverboard-firmware-hack-FOC
  With Field Oriented Control (FOC)
  ☆56Updated 2 years ago
• m-rtijn / bmp180
  A Python module to handle the I2C communication between a Raspberry Pi and a BMP180
  ☆14Updated 2 years ago
• ricardodeazambuja / Maple-Syrup-Pi-Camera
  Low power smart camera (3D printed) based on the Raspberry Pi Zero W and Google Coral EdgeTPU
  ☆73Updated 10 months ago
• Seeed-Studio / Seeed_Python_RPi
  This is a Python library that facilitates the utilization of onboard hardware in Seeed's RPI series products.
  ☆29Updated 8 months ago
• cbm80amiga / oled_caliper
  Digital caliper reading with Arduino
  ☆18Updated 7 years ago