Alternatives and similar repositories for bms

Users that are interested in bms are comparing it to the libraries listed below

• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆199Updated last month
• sshoecraft / jbdtool
  JBD BMS Linux utility
  ☆70Updated 7 months ago
• kolins-cz / Smart-BMS-Bluetooth-ESP32
  Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
  ☆117Updated last year
• Uksa007 / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆197Updated last year
• Sleeper85 / esphome-jk-bms-can
  ☆104Updated last year
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆95Updated last month
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆177Updated 4 months ago
• syssi / esphome-pace-bms
  ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)
  ☆70Updated last month
• syssi / esphome-pipsolar
  ESPHome component to monitor and control a pipsolar inverter via RS232
  ☆143Updated last month
• Sleeper85 / esphome-yambms
  Yet another multi-BMS Merging Solution
  ☆169Updated last week
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART, RS485 or BLE
  ☆106Updated last month
• fl4p / batmon-ha
  Add-on for Home Assistant to connect JK, JBD, Daly, ANT, SOK, Supervolt and other BMS via Bluetooth
  ☆443Updated last month
• Fabian-Schmidt / esphome-victron_ble
  Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.
  ☆354Updated last month
• timmchugh11 / Chinese-Diesel-Heater---ESPHome
  ☆38Updated 7 months ago
• syssi / esphome-virtual-can-bms
  ESPHome component to emulate a SMA/Victron compatible BMS via CAN bus
  ☆16Updated last month
• irekzielinski / Pylontech-Battery-Monitoring
  Adding WiFi monitoring to US2000B and US2000C batteries.
  ☆152Updated 3 weeks ago
• Tertiush / bmspace
  Pace Battery Management System
  ☆61Updated last year
• nealcarney / ESPHome-MaxxFan-controller
  An ESP32-based controller to control MaxxFan and Houghton air conditioner using ESPHome and Home Assistant
  ☆31Updated 9 months ago
• patman15 / BMS_BLE-HA
  This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant.
  ☆273Updated last week
• Tobi177 / venus-chargerybms
  Driver to embed the Chargery BMS to a Venus OS device
  ☆33Updated 2 years ago
• PurpleAlien / jk-bms_grafana
  Read data from a JK BMS and graph it in Grafana
  ☆59Updated 11 months ago
• KinDR007 / VictronMPPT-ESPHOME
  Victron Mppt charger ve.direct to esphome node
  ☆387Updated 4 months ago
• kwindrem / VeCanSetup
  Manages Victrion VenusOs VeCan (aka CANbus) ports
  ☆54Updated 9 months ago
• byte4geek / SEPLOS_MQTT
  Read data From Seplos BMS and send them to the Home Assistant
  ☆47Updated 2 years ago
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆33Updated 2 years ago
• softwarecrash / EPEver2MQTT
  ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT
  ☆64Updated 4 months ago
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆83Updated 2 years ago
• KinDR007 / Victron-MPPT-ve.direct-to-MQTT
  Read data from victron mppt and transport to mqtt server
  ☆42Updated 3 years ago
• mc0110 / inetbox2mqtt
  communicate over mqtt protocol to simulate a truma inetbox
  ☆115Updated this week
• danpeig / ESP32EnergyMonitor
  Multiple phase DIY energy consumption monitor using ESP32 and ESPHome
  ☆221Updated 2 months ago