danjulio / tCam
Thermal imaging cameras based on the ESP32 and Lepton 3.5
☆116Updated 10 months ago
Alternatives and similar repositories for tCam
Users that are interested in tCam are comparing it to the libraries listed below
Sorting:
- Code and libraries to use a FLIR Lepton Thermal Imaging Camera Module☆190Updated last year
- There are now, a total of 81 hardware electronics on this catalogue for Smart Devices, A.I. enabled. Designed in Kicad, and ready to dow…☆89Updated 7 months ago
- ☆39Updated 5 months ago
- Open-Source firmware for pick and place feeders☆55Updated 3 months ago
- ESP32-S3 Thermal Sensor using an 8-bit bus☆82Updated last year
- ☆103Updated 2 years ago
- ☆137Updated 4 months ago
- Raspberry Pi Pico based grblHAL Controller☆148Updated last year
- A simple BLDC motor controller, and the evolution of the EasyController2☆85Updated last year
- A compact weather station.☆211Updated last year
- Speed controller and receiver for small robots☆41Updated 2 months ago
- Compact, feature-filled CM5 carrier board☆54Updated last month
- This repository contains all hardware information about Walter and shields☆52Updated 3 months ago
- An Arduino shield to test the TMC2209 stepper motion controller by Trinamic.☆36Updated 2 years ago
- ESP32-S3 based SimpleFOC compatible BLDC driver module☆52Updated 9 months ago
- ☆33Updated 2 years ago
- 2.5kV USB 2.0 Isolator with 200mA Power Supply and Full Speed (12Mbps) Support☆62Updated 2 years ago
- LinuxCNC configuration with EtherCAT Servo Drives Leadshine EL8 and some Beckhoff IO Modules☆31Updated 7 months ago
- Source for LumenPnP Feeders☆131Updated 2 months ago
- ☆36Updated 9 months ago
- Precision auto-ranging current meter (ammeter)☆102Updated last month
- Project for building a cheap galvo laser system using Stepper motors and widely available parts.☆51Updated last year
- Dual brushed motor ESC firmware compatible with brushless motor ESCs☆28Updated 11 months ago
- An open source Arduino ESP32 MPPT Charger firmware equipped with charging algorithms, WiFi, LCD menus & more!☆36Updated 2 months ago
- Paste extruder head for the LumenPnP☆40Updated 3 months ago
- All 3d-Printed Tape&Reel Feeder☆78Updated 6 months ago
- Topdon TC001 (and clone) thermal camera app to read and display live and offline thermal data☆97Updated 7 months ago
- An Open Source Thermal Imaging IR camera that you can build yourserlf☆49Updated 2 months ago
- Battery Health Monitor A compact device for monitoring the State of Health (SoH) and State of Charge (SoC) of lithium batteries. It uses …☆26Updated last month
- A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.☆389Updated 9 months ago