Alternatives and similar repositories for simple-dgps:

Users that are interested in simple-dgps are comparing it to the libraries listed below

• Archfx / RTK-NTRIP-RTCM
  Contains program to Send RTCM3 📡 data to Hosted NTRIP server and fetch NTRIP data and display on another rover. Real time kinematic supp…
  ☆28Updated 2 years ago
• jdesbonnet / GNSS_RTK
  Software, scripts and data relating to GNSS/GPS Real Time/Post-Processed Kinematic sat nav
  ☆26Updated 3 months ago
• bolderflight / navigation
  Navigation filters, transforms, and utilities
  ☆13Updated 2 years ago
• osqzss / PocketSDR
  ☆12Updated 3 weeks ago
• Aceinna / ublox_decoder
  Decode Ublox M8L data
  ☆33Updated 4 years ago
• easyrtk / cors_compare
  ☆12Updated 3 years ago
• meh301 / PocketSDRNEO
  Release of PocketSDR NEO* edition schematics, PCB, and BOM in KICAD 7.0 format.
  ☆13Updated 10 months ago
• sparkfun / SparkFun_RTK_Facet
  The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.
  ☆20Updated 7 months ago
• acsgn95 / PELLICANUS
  ☆11Updated 3 years ago
• septentrio-gnss / uBloxCorrectionsWithSeptentrio
  ☆12Updated 6 months ago
• amungo / ItsFx3
  Software for Amungo's nut4nt board RF front-end IC with NTLab NT1065 four-channel multiband navigation
  ☆29Updated 2 years ago
• commschamp / cc.ublox.generated
  UBLOX (UBX) protocol definition, generated by commsdsl2comms out of cc.ublox.commsdsl schema
  ☆19Updated 2 months ago
• bolderflight / vector-nav
  Arduino and CMake driver for VectorNav INS sensors.
  ☆16Updated last year
• emlid / RTKLIB
  Emlid's fork of Tomoji Takasu's RTKLIB used in Reach RTK receiver
  ☆77Updated 3 years ago
• tridge / pyUblox
  python Ublox module
  ☆105Updated last year
• Jin-Whu / gstream
  An open-source GNSS-oriented data stream client library.
  ☆17Updated 2 years ago
• fedorbaklanov / open-aided-navigation
  This is a repository of the Open Aided Navigation project. The project aims to demonstrate and explain state of the art methods of modern…
  ☆19Updated 2 years ago
• gnss-sdr / gr-dbfcttc
  A GNU Radio module of a digital beamformer prototype for GNSS receivers
  ☆18Updated 8 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆60Updated last year
• CentipedeRTK / pi-gen_RTKbase
  fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images
  ☆21Updated 7 months ago
• PenroseWang / SimGPS
  A repo for introduction of GNSS
  ☆12Updated 4 years ago
• dalymople / ubxtranslator
  A simple python parser for UBX messages
  ☆26Updated 11 months ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆93Updated 2 months ago
• slgrobotics / Esp32_RTK_BaseStation
  Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster
  ☆31Updated 2 years ago
• jmfriedt / max2771_fx2lp
  multi MAX2771 GNSS receiver
  ☆36Updated last month
• fguiet / gnss-rtk
  My own RTK network
  ☆24Updated last year
• JonasBchrt / snapshot-gnss-algorithms
  Algorithms for location estimation based on short GNSS snapshots.
  ☆29Updated last year
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• globsky / SignalSim
  A multi-stage GNSS signal and data simulator
  ☆60Updated this week
• AviyaanTech / SW_GNSS
  GNSS data post processing tool based on RTKLIB
  ☆11Updated 3 years ago