openxc / reference-vi
Open Source Hardware Schematics for OpenXC Vehicle Interface
☆39Updated 4 years ago
Alternatives and similar repositories for reference-vi
Users that are interested in reference-vi are comparing it to the libraries listed below
Sorting:
- Setup and install for ARMinARM board.☆29Updated 9 years ago
- Eagle CAD files for CANBus Triple Hardware☆57Updated 7 years ago
- Automatically exported from code.google.com/p/mphidflash☆32Updated last year
- Smalls mint tin sized BeagleBone (KiCAD version)☆58Updated 6 years ago
- basic command line utility to automate the Saleae Logic software using the ppannuto python-saleae library☆40Updated 3 years ago
- Small breadboard friendly STM32 (eventually other mcu's too) eval boards with exposed JTAG and SWD for the use with Black Magic Probe and…☆68Updated 4 years ago
- USB Full-Speed (12Mbps) protocol analyzer for the DSO Quad☆21Updated 12 years ago
- CAN driver project for the Espressif ESP32☆27Updated 4 years ago
- InfraRed Analyzer plugin for Saleae Logic software☆26Updated 10 years ago
- In application debugger for ARM Cortex microcontrollers.☆22Updated 2 years ago
- Smalls mint tin sized BeagleBone☆58Updated 8 years ago
- ESP8266 based Raspberry Pi WiFi module☆26Updated 9 years ago
- Michrochip CAN BUS Analyzer firmware☆22Updated 8 years ago
- ☆38Updated 2 weeks ago
- Example projects for the 1BitSy development boards.☆38Updated last year
- Raspberry PI bare metal☆47Updated 11 years ago
- In application debugger for ARM Cortex microcontrollers.☆32Updated 8 years ago
- Just messing with an FPGA☆25Updated 5 years ago
- Automatically exported from code.google.com/p/dangerous-prototypes-open-hardware☆79Updated last year
- Simple GUI for USBtin (USB to CAN interface)☆42Updated 4 years ago
- gs_usb compatible firmware for candleLight, cantact and canable☆24Updated 6 years ago
- Drive an old laptop display from an 8-bit AVR microcontroller☆20Updated 9 years ago
- A Python implementation of the Interchangeable Virtual Instrument standard.☆55Updated 4 years ago
- Open Source Hardware for STM32, complementing openstm32☆48Updated 11 years ago
- Eagle libraries pretty footprints...☆38Updated 10 years ago
- A fork of CANard with various tweaks and improvements implemented☆49Updated 6 years ago
- Andy's Workshop Reflow Oven Controller☆33Updated 7 years ago
- Armstart's CMSIS-DAP firmware implementation in gcc and makefile. Note: this is not the original Armstart repo☆26Updated 4 years ago
- An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.☆35Updated 5 years ago
- FX2 EZ USB eeprom reader/writer for libusb☆29Updated 2 years ago