Alternatives and similar repositories for ultrazed_base_boards

Users that are interested in ultrazed_base_boards are comparing it to the libraries listed below

• PCB-Arts / zynq-feather
  ☆48Updated 4 years ago
• mattvenn / basic-ecp5-pcb
  Reference design for Lattice ECP5 FPGA. Featuring Raspberry Pi interface and 6 PMODs
  ☆112Updated 4 years ago
• intergalaktik / ulx4m
  PCB for ULX4M FPGA R&D board
  ☆52Updated 3 months ago
• antmicro / zynq-video-board
  Open Hardware carrier board supporting modules with Zynq 7000 All Programmable SoC devices.
  ☆58Updated last year
• antmicro / kintex-410t-devboard
  ☆36Updated 9 months ago
• controlpaths / blog
  Projects published on controlpaths.com and hackster.io
  ☆41Updated 2 years ago
• imrickysu / ZYNQ-Custom-Board-Bring-Up-Guide
  This is a guide for bringing up custom ZYNQ boards. It covers test sequence, test method, common error situations and code and project th…
  ☆69Updated 7 years ago
• davemuscle / sigma_delta_converters
  Implementation and test of reusable sigma-delta A/D converters written in SystemVerilog on a MAX10 FPGA with minimal external components
  ☆69Updated 3 years ago
• circuitvalley / mipi_dsi_bridge_fpga
  Source code of MIPI DSI Bridge Published on https://www.circuitvalley.com
  ☆108Updated last year
• openXC7 / toolchain-installer
  Convenience script to install the nextpnr-xilinx toolchain for Kintex7, Artix7, Spartan7 and Zynq7
  ☆85Updated 3 weeks ago
• ZipCPU / wbi2c
  Wishbone controlled I2C controllers
  ☆50Updated 8 months ago
• amaranth-farm / amlib
  assorted library of utility cores for amaranth HDL
  ☆93Updated 10 months ago
• no2fpga / no2usb
  Nitro USB FPGA core
  ☆86Updated last year
• ultraembedded / core_usb_host
  Basic USB 1.1 Host Controller for small FPGAs
  ☆91Updated 5 years ago
• openXC7 / xc7k325t-blinky-nextpnr
  ☆45Updated 2 years ago
• vmunoz82 / eda_tools
  A Dockerfile with a collections of ready to use open source EDA tools: Yosys, SimbiYosys (with Z3, boolector and Yices2), nextpnr-ice40, …
  ☆44Updated 2 years ago
• circuitvalley / USB3_MIPI_CSI2_RX_V2_Crosslink_NX
  MIPI CSI-2 Camera Sensor Receiver V2 Verilog HDL implementation For any generic FPGA. Tested with IMX219 IMX477 on Lattice Crosslink NX w…
  ☆58Updated 5 months ago
• joshajohnson / ecp5-mini
  ECP5 FPGA in an "S7 Mini" form factor
  ☆80Updated 3 years ago
• ultraembedded / core_usb_cdc
  Basic USB-CDC device core (Verilog)
  ☆80Updated 4 years ago
• f4pga / prjtrellis
  Documenting the Lattice ECP5 bit-stream format.
  ☆56Updated 2 years ago
• gregdavill / ecpprog
  Programmer for the Lattice ECP5 series, making use of FTDI based adaptors
  ☆91Updated 8 months ago
• gatecat / TrellisBoard
  Ultimate ECP5 development board
  ☆111Updated 6 years ago
• controlpaths / litefury_rp5
  Conecting the Litefury FPGA accelerator to Raspberry Pi 5 over PCIe gen2 x1
  ☆31Updated last year
• fjullien / migen_litex_tutorials
  ☆110Updated 2 years ago
• FMCHUB / Lib_Altium
  Altium Designer libraries for ANSI/VITA 57 FPGA Mezzanine Card (FMC) Standard
  ☆43Updated 3 years ago
• XyleMora / EBAZ4205
  EBAZ4205 is Xilinx Zynq based mining board used in Ebang Ebit E9+ bitcoin miner machine.
  ☆79Updated last year
• jsloan256 / titan
  Altium PCB project for the Titan PCI Express development card. This card uses the Lattice ECP5 FPGA.
  ☆19Updated 10 years ago
• perehinik / Logic_Analyzer_PCB
  KiCad PCB project of Logic Analyzer
  ☆43Updated 4 years ago
• hdl-util / mipi-csi-2
  Capture images/video from a Raspberry Pi Camera (MIPI CSI-2) with an FPGA
  ☆69Updated 5 years ago
• antmicro / fmc-sata-adapter
  Adapter board exposing SATA M.2 SSD on FMC board-to-board connector
  ☆12Updated last year