chemicstry / candle_driverLinks
Python wrapper for candle (gs_usb) adapters.
☆10Updated 4 years ago
Alternatives and similar repositories for candle_driver
Users that are interested in candle_driver are comparing it to the libraries listed below
Sorting:
- Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!☆85Updated this week
- Open source project that uses the CANable hardware from protofusion.org☆44Updated 5 months ago
- slCAN compatible firmware for STM32f103C8T6☆78Updated 3 years ago
- Python Windows/Linux CAN driver based on WCID for Geschwister Schneider USB/CAN devices and candleLight USB CAN interfaces☆30Updated 9 months ago
- gs_usb compatible firmware for candleLight, cantact and canable☆81Updated 4 years ago
- slcan firmware for the CVRA CAN to USB dongle☆37Updated 4 years ago
- A CANopen protocol for all systems such as embedded, PC, etc.☆119Updated last month
- This is project SuperCAN. An open source USB to CAN-FD protocol.☆92Updated 6 months ago
- Joulescope graphical user interface☆103Updated last week
- Firmware to support gs_usb on most STM32 devices☆54Updated 4 months ago
- Command-line tool to flashing devices by CAN-BUS☆90Updated 6 years ago
- This is the Arduino Library for Grove - IMU 9DOF(ICM20600+AK09918)☆20Updated last year
- Library for CAN-over-Serial-Line Interfaces (SLCAN Protocol)☆55Updated last year
- STM32 CAN-bus bootloader☆78Updated 9 years ago
- Flash firmware to STM32 microcontrollers using Python.☆121Updated last year
- This Yet Another Bootloader (YAB) is for STM32, STM32F103, STM32F407, STM32L433, STM32F723, STLINK-V3, STLINK-V3MINI, CMSIS-DAP.☆90Updated 5 years ago
- ☆51Updated 6 years ago
- Firmware for the CANable USB to CAN adapter☆242Updated 2 years ago
- STM32 bootloader with AES encription☆30Updated last year
- FOC Motor Control Firmware☆96Updated last year
- A set of python scripts to create dfu files and upload them to stm32 boards☆81Updated 4 years ago
- The bootloader used to flash our CAN-connected boards☆151Updated 2 years ago
- A Python Library provides full access of SPI/I2C/UART settings and communication with CH347 USB-SPI/I2C/UART bridge chip in Python langua…☆53Updated last month
- ☆41Updated 6 years ago
- ☆67Updated 10 years ago
- Arduino Library Version of CANFestival CANopen Stack☆57Updated 10 years ago
- ☆131Updated 2 years ago
- USB CAN-FD interface based on the STM32G0 that works well with gs_usb on Linux☆50Updated 2 years ago
- LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.☆86Updated 3 years ago
- ☆41Updated 8 years ago