Alternatives and similar repositories for stm32-slcan:

Users that are interested in stm32-slcan are comparing it to the libraries listed below

• madprogrammer / stm32-can-bootloader
  STM32 CAN-bus bootloader
  ☆72Updated 8 years ago
• normaldotcom / candleLight_fw
  gs_usb compatible firmware for candleLight, cantact and canable
  ☆66Updated 3 years ago
• suburbanembedded / hadoucan-fw
  Firmware for SM-1301 USB-CAN FD adapter
  ☆24Updated 6 months ago
• uCAN-LIN / LinUSBConverter
  LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.
  ☆74Updated 2 years ago
• TheRo0T / CAN-USB-STM32
  ☆63Updated 9 years ago
• normaldotcom / canable-fw
  Firmware for the CANable USB to CAN adapter
  ☆198Updated last year
• ryedwards / budgetcan-fw
  Firmware to support gs_usb on most STM32 devices
  ☆38Updated 2 weeks ago
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆36Updated 5 years ago
• cvra / CAN-USB-dongle-fw
  slcan firmware for the CVRA CAN to USB dongle
  ☆37Updated 3 years ago
• mac-can / SerialCAN
  Library for CAN-over-Serial-Line Interfaces (SLCAN Protocol)
  ☆38Updated 6 months ago
• darauble / lawicel-slcan
  Partial Lawicel/SLCAN implementation at 1 Mb/s CAN speed and 460800 UART baud rate
  ☆28Updated 6 years ago
• effenco / stm32-can-bootloader
  can bootloader for use with stm32 microcontrollers
  ☆40Updated 3 years ago
• mxcd / CANnon
  A versatile CAN bootloader for the STM32 and friends
  ☆17Updated 7 years ago
• tuna-f1sh / entree
  Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!
  ☆79Updated last year
• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆79Updated 5 years ago
• jgressmann / supercan
  This is project SuperCAN. An open source USB to CAN-FD protocol.
  ☆78Updated 2 weeks ago
• phryniszak / strtt
  Segger RTT console using ST-link
  ☆47Updated 8 months ago
• vladisenko / USB-CAN
  Yet another USB-CAN adapter.
  ☆12Updated 3 years ago
• nicokorn / STM32F4XX_RNDIS_DEMO
  To have platform independent network interfaces over usb which is working with Linux, Windows, Mac OS ect. called RNDIS. This project is …
  ☆31Updated 2 months ago
• majbthrd / stm32ecm
  USB CDC-ECM implementation for STM32F072
  ☆71Updated 4 years ago
• Zubax / canface_cf1
  High performance CAN-USB/CAN-UART adapter + UAVCAN devboard
  ☆36Updated 2 years ago
• moonglow / kvaser_cantact
  Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.
  ☆44Updated 3 years ago
• linklayer / busmaster
  BUSMASTER is an Open Source Software tool to simulate, analyze and test data bus systems such as CAN. BUSMASTER was conceptualized, desig…
  ☆37Updated 4 years ago
• open-LIN / open-LIN-c
  Implementation of Local interconnect network in c
  ☆72Updated last year
• afiskon / stm32-fatfs-examples
  STM32: examples of usage of FatFs library
  ☆45Updated 4 years ago
• Misaka0x2730 / RailLink
  Compact isolated version of J-Link v9.
  ☆120Updated 3 years ago
• geier99 / STM32-CAN_CubeMX_Tests
  Demonstrate the use from STM32CubeMX for my STM32-CAN hardware
  ☆28Updated 8 years ago
• normaldotcom / cangaroo
  Open source can bus analyzer software - with support for CANable / CANable2, CANFD, and other new features
  ☆211Updated last year
• cvra / can-bootloader
  The bootloader used to flash our CAN-connected boards
  ☆146Updated 2 years ago
• sfyip / STM32F103_MSD_BOOTLOADER
  STM32F103 Mass Storage Device Bootloader
  ☆74Updated 2 years ago