Alternatives and similar repositories for DieBieSlave-Firmware-Nunchuck

Users that are interested in DieBieSlave-Firmware-Nunchuck are comparing it to the libraries listed below

• DieBieEngineering / DieBieSlave
  Universal EtherCAT slave based on the LAN9252.
  ☆168Updated 6 years ago
• MicrochipTech / ethercat-software-framework
  Microchip's EtherCAT Software Stack
  ☆32Updated 2 years ago
• ethercat-diy / arducat
  EtherCAT over arduino (atmega1280)
  ☆54Updated 7 years ago
• XiaojiaoChen / F7_Ethercat_RTOS
  STM32-FreeRTOS-Ethercat realtime platform
  ☆72Updated 6 years ago
• MSiv15 / STM32F303_BLDCMotorControl
  ベクトル制御でブラシレスモータを回す
  ☆21Updated 6 years ago
• suda-morris / FreeECAT
  EtherCAT Slave(XMC4800) and Master(IgH), Open source both in hardware and software
  ☆57Updated 7 years ago
• lipoyang / SOEM4Arduino
  Simple Open EtherCAT Master Library for Arduino
  ☆73Updated 4 years ago
• Felixchen1024 / STM32F103_LAN9252_EtherCAT_Slave
  ☆15Updated 4 years ago
• andreili / STM32-PLC
  The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.
  ☆63Updated 7 years ago
• synapticon / siitool
  Siitool generates your SII/EEPROM files from the ESI/XML description files of your EtherCAT devices. The program is also capable of inter…
  ☆88Updated 2 months ago
• DanielMartensson / STM32-PLC
  STM32 microcontroller with lots of periferials such as ADC, differential ADC, Input Capture, PWM, USB, Encoder, DAC, Digital Input, RTC, …
  ☆142Updated last year
• yuqlid / EtherCAT_board
  EtherCAT slave board uisng LAN9252
  ☆15Updated 8 years ago
• kubabuda / EEPROM_generator
  SOES EEPROM Generator and Slave Stack Code generation tool for EtherCAT devices using SOES library
  ☆40Updated last year
• DanielMartensson / Easy-CANopen
  A CANopen protocol for all systems such as embedded, PC, etc.
  ☆118Updated 2 years ago
• w1ne / CANOpenNode-CubeMX-HAL
  Port of the CANOpenNode stack drivers to support STM32CubeMX HAL.
  ☆48Updated 6 years ago
• SimeonSimeonovIvanov / FOC-Servo
  Field Oriented Control of Permanent Magnet Synchronous Motors ( AC Servo Driver )
  ☆118Updated last year
• CANopenNode / CANopenDemo
  CANopenNode tutorial and testing
  ☆53Updated last year
• Juanduino / S4_CurvePlanner
  4th Order S-curve motion planning in C++, Intended for use w. SimpleFOC. Field Oriented Motor control
  ☆24Updated last year
• Zubax / canface_cf1
  High performance CAN-USB/CAN-UART adapter + UAVCAN devboard
  ☆37Updated 2 months ago
• DieBieEngineering / DieBieCANToUSB
  CAN to USB converter based on the cantact
  ☆13Updated 6 years ago
• zenglongGH / stm32f4-CANopen-project
  Empty stm32f4 project with canopen-node integrated
  ☆13Updated 11 years ago
• rtlabs-com / c-open
  CANopen stack for embedded devices
  ☆86Updated last week
• ATM-HSW / mbed_target
  Mbed OS 5 Simulink and Embedded Coder Target
  ☆32Updated 3 years ago
• nucleron / RTE
  ☆57Updated 6 years ago
• GrandviewIoT / MotorLib_Embedded
  Suite of code projects to provide Motor Control and Motion Control for Embedded Systems/MCs
  ☆30Updated 9 years ago
• DieBieEngineering / DieBieMS-Bootloader
  This is the bootloader firmware portion of my DieBieMS battery management system.
  ☆24Updated 6 years ago
• marel-keytech / openCANopen
  Open Source CANopen Stack
  ☆62Updated 6 years ago
• l3VGV / cordic_atan2
  cordic atan2 for stm32
  ☆11Updated 5 years ago
• ethercat-diy / stm32f4_ethercat
  ☆30Updated 9 years ago
• madprogrammer / stm32-can-bootloader
  STM32 CAN-bus bootloader
  ☆78Updated 9 years ago