burra / byd_battery
Try to reverse a BYD battery system
β24Updated 2 years ago
Alternatives and similar repositories for byd_battery:
Users that are interested in byd_battery are comparing it to the libraries listed below
- Modbus proxy for SolarEdge inverters and unsupported kWh metersβ33Updated 10 months ago
- Python lib to talk to pylontech lithium batteries π (US2000, US3000, ...) using RS485β75Updated last year
- ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485β83Updated 3 weeks ago
- Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.β32Updated last month
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiterβ82Updated 3 weeks ago
- Brings EVSE WB/DIN into your WiFiβ79Updated 2 years ago
- This project uses ESP32 to translate MODBUS messages of CHINT's DTSU666 Energy Meter into HUAWEI DTSU666H formatβ31Updated last year
- How to connect to a Sofar HYD3600 Inveter and 2 Pylontech US3000 batteriesβ19Updated 4 years ago
- Bridge for 2018+ R32 LG Air/Water-Heat pumpsβ24Updated 2 years ago
- Adding WiFi monitoring to US2000B and US2000C batteries.β142Updated 2 years ago
- Modbus RTU / RS485 to MQTT bridge for Solis Mini solar inverter.β57Updated 3 years ago
- Hardware battery safety controller (BSC)β26Updated 11 months ago
- β17Updated 2 weeks ago
- Monitoring Sunspec (Modbus TCP) compatible Solar Invertersβ36Updated 3 weeks ago
- Smart Electric Vehicle Charging Station (EVSE)β76Updated 11 months ago
- Smart Electric Vehicle Charging Station (EVSE)β90Updated 4 months ago
- Firmware for OpenEnergyMonitor OpenEVSEβ18Updated 2 years ago
- β47Updated 2 weeks ago
- ESPHome component to monitor a Solax X1 mini via RS485β39Updated 3 weeks ago
- ESP32 EVSE firmwareβ89Updated last week
- LG Resu 10 LV Monitorβ29Updated 5 years ago
- Firmware battery safety controller (BSC)β120Updated last week
- Smart Electric Vehicle Charging Station (EVSE)β57Updated last week
- HΓΆrmann Garage Door Opener mit ESP8266 (direkt ΓΌber Bus, ohne UAP1 !)β45Updated 2 years ago
- This is the library of the KNX-User-Forum Arduino project initiated by thorsten Gehrigβ48Updated 5 months ago
- β36Updated 5 months ago
- OpenEVSE V4 WiFi gateway using ESP32β184Updated 2 weeks ago
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylonβ15Updated last week
- Read data From Seplos BMS and send them to the Home Assistantβ44Updated last year
- Driver to embed the Chargery BMS to a Venus OS deviceβ32Updated last year