Alternatives and similar repositories for RPR

Users that are interested in RPR are comparing it to the libraries listed below

• CentipedeRTK / centipede
  Centipède: un réseau collaboratif de Bases GNSS RTK low-cost
  ☆53Updated 3 years ago
• CentipedeRTK / RtkBaseVar
  🛰️ 📡 Broadcasting the RTCM3 correction from the nearest RTK base 📍
  ☆21Updated last year
• sparkfun / SparkFun_RTK_Facet
  The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.
  ☆21Updated last year
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• jerabaul29 / OpenMetBuoy-v2021a
  An easy to build, affordable, customizable, open source instrument for oceanographic measurements - with global Iridium coverage
  ☆67Updated 2 months ago
• incarvr6 / esp32-ntrip-DUO
  ESP32 NTRIP Interface
  ☆70Updated 10 months ago
• slgrobotics / Esp32_RTK_BaseStation
  Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster
  ☆32Updated 3 years ago
• Pat-I / OpenGrade3D
  3D grade control
  ☆14Updated last month
• sparkfun / SparkFun_Unicore_GNSS_Arduino_Library
  An Arduino library for the UM980 and other Unicore based triband GNSS RTK receivers.
  ☆20Updated last month
• emlid / ReachView
  Reach-hosted web-interface for RTKLIB
  ☆58Updated 6 years ago
• Alerovere / GPS-utilities
  Utilities to postprocess GNSS data acquired with single or double-band receivers. The scripts were first drafted to work with EMLID GNSS …
  ☆14Updated 3 years ago
• sparkfun / SparkFun_RTK_Everywhere_Firmware
  Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
  ☆46Updated this week
• sparkfun / SparkFun_RTK_Torch
  The datasheets and documentation for the centimeter level RTK Torch GNSS receiver with built in tilt compensation.
  ☆11Updated 10 months ago
• Kanstantsin-Y / GNSS_RTCM_DECODER
  Python decoder for GNSS data in RTCM3 format
  ☆23Updated last year
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, QGC, RTCM3, NTRIP and SPARTN protocols
  ☆129Updated 3 weeks ago
• Coffeetrac / AG_NTRIP_ESP
  AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)
  ☆42Updated 6 years ago
• VimDrones / open-rtk
  open source rtk base
  ☆13Updated 5 years ago
• kirienko / pylgrim
  GNSS software receiver written in python
  ☆21Updated 5 years ago
• rokubun / gnss_tools
  Docker that encapsulates various GNSS processing tools
  ☆20Updated 3 years ago
• santiagooz / GNSS-R_raw_data_processing
  Set of Matlab scripts to process GPS L1 C/A reflected signals from CYGNSS Level 1 Raw Intermediate Frequency Data Records.
  ☆19Updated 2 years ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆102Updated last month
• bpurinton / GNSS-Correction-RTKLIB
  GNSS Collection and Post-Processing with RTKLIB
  ☆23Updated 4 years ago
• jacobjhansen / RTCM-Pi
  GNSS Base Station based on Raspberry Pi 4B
  ☆50Updated 2 years ago
• AviyaanTech / SW_GNSS
  GNSS data post processing tool based on RTKLIB
  ☆12Updated 4 years ago
• zsiki / Find-GCP
  Find ArUco markers in digital photos
  ☆78Updated 8 months ago
• rivertechlabs / suspendedsedimentsensor
  3D-printed, open-source suspended sediment sensor for river network monitoring (prototype 3.0)
  ☆12Updated 2 years ago
• 0015 / LoRa_GPS_Viewer
  [ThatProject] ESP32 LoRa GPS Data Viewer
  ☆14Updated 3 years ago
• pbeyssac / millipede-caster
  The Millipede NTRIP/RTK caster
  ☆31Updated this week
• jancelin / RTKlibDroid
  Rtklib for android linux (Userland)
  ☆25Updated 5 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆61Updated last year