Alternatives and similar repositories for mowi

Users that are interested in mowi are comparing it to the libraries listed below

• Kanstantsin-Y / GNSS_RTCM_DECODER
  Python decoder for GNSS data in RTCM3 format
  ☆23Updated 11 months ago
• nunojpg / ntripserver
  Ntrip Version 2.0 Command Line Server
  ☆72Updated 10 years ago
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, QGC, RTCM3, NTRIP and SPARTN protocols
  ☆128Updated last month
• semuconsulting / pyubx2
  Python library for parsing and generating UBX GPS/GNSS protocol messages.
  ☆235Updated 3 weeks ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆102Updated last week
• septentrio-gnss / mosaicHAT
  Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5
  ☆56Updated last year
• semuconsulting / pyrtcm
  Python library for parsing RTCM 3 protocol messages.
  ☆104Updated 3 weeks ago
• easyrtk / cors_compare
  ☆12Updated 4 years ago
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆123Updated last year
• ISTA-UniBwM / GNSSLogger_old
  ☆14Updated last year
• nunojpg / ntripcaster
  Standard Ntrip Broadcaster
  ☆65Updated 6 years ago
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆90Updated 4 years ago
• emlid / RTKLIB
  Emlid's fork of Tomoji Takasu's RTKLIB used in Reach RTK receiver
  ☆78Updated 4 years ago
• taroz / GNSS-Radar
  GNSS-Radar is a web application to show the current GNSS constellation
  ☆94Updated 11 years ago
• tomojitakasu / PocketSDR
  ☆421Updated 8 months ago
• u-blox / ublox-C099_F9P-uCS
  ☆63Updated 5 years ago
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆96Updated 6 years ago
• sparkfun / SparkFun_RTK_Torch
  The datasheets and documentation for the centimeter level RTK Torch GNSS receiver with built in tilt compensation.
  ☆11Updated 9 months ago
• tomojitakasu / RTKLIB_bin
  ☆366Updated 2 years ago
• taroz / mosaicHAT-Station
  mosaicHAT+ GNSS antenna + Raspberry Pi + Touch display + Battery + Case
  ☆32Updated 4 years ago
• GNSSOEM / ELT_RTKBase
  Raspbian compatible RtkBase software for Unicore UM98x, Bynav M2x and Septentrio Mosaic X5
  ☆59Updated last week
• nunojpg / rtcm3torinex
  Real-time converter from NTRIP streamed RTCM3 data to RINEX
  ☆62Updated 10 years ago
• emlid / ReachView
  Reach-hosted web-interface for RTKLIB
  ☆58Updated 6 years ago
• sparkfun / SparkFun_RTK_Everywhere_Firmware
  Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
  ☆44Updated last week
• rtklibexplorer / rtklib-py
  Python implementation of RTKLIB. Based on demo5 version. Currently only supports PPK solutions
  ☆224Updated 2 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆61Updated last year
• Morcki / android_raw2rinex
  convert raw data file generated by GnssLogger into observation file(Version Rinex 3.x)
  ☆10Updated 6 years ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• pbeyssac / millipede-caster
  The Millipede NTRIP/RTK caster
  ☆31Updated 2 weeks ago
• AviyaanTech / SW_GNSS
  GNSS data post processing tool based on RTKLIB
  ☆12Updated 3 years ago