straga / Smart-Meter-GatewayLinks
Gateway for Solax Invertor - it can use any Modbus Meter.
☆14Updated last month
Alternatives and similar repositories for Smart-Meter-Gateway
Users that are interested in Smart-Meter-Gateway are comparing it to the libraries listed below
Sorting:
- Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy☆116Updated last year
- JBD BMS Linux utility☆68Updated 5 months ago
- Arduino Interface for cheap 2.4ghz RF enabled Solar Micro Inverters☆66Updated 2 years ago
- Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32☆13Updated last month
- ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems☆175Updated 2 months ago
- Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485☆80Updated 2 years ago
- Converts the JK-BMS RS485 data to Pylontech CAN data☆92Updated 7 months ago
- ☆64Updated 3 years ago
- ☆15Updated 8 years ago
- Example code to communicate with Huawei R4850G2 Power Supply via CAN☆75Updated last year
- ☆103Updated last year
- Control one or more R4875G1 R4875G5 R4830G2 R4850G2 R4850S1 and adjust Current and Voltage Parameters on HUAWAI R4875G Battery-Charger vi…☆37Updated 2 months ago
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆93Updated this week
- ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE☆183Updated last week
- Read and Write Library for Overkill Solar BMSs☆19Updated 3 years ago
- ☆30Updated 3 years ago
- Firmware for the ESP32 add on Board☆12Updated 2 years ago
- ESPHome component to emulate a SMA/Victron compatible BMS via CAN bus☆16Updated 3 months ago
- Python Script for raspberry reading BMS Ant parameters via Bluetooth☆42Updated 4 years ago
- This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…☆74Updated last year
- ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters☆43Updated 4 years ago
- ☆62Updated 6 years ago
- Library for working with JBD BMS☆75Updated last year
- How to connect to a Sofar HYD3600 Inveter and 2 Pylontech US3000 batteries☆20Updated 4 years ago
- Contains an Arduino project for Espressif ESP32 that will run a web server with web sockets to display data from a Victron MPPT charge co…☆28Updated 5 years ago
- Read data from victron mppt and transport to mqtt server☆42Updated 3 years ago
- Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…☆130Updated 4 years ago
- Driver to embed the Chargery BMS to a Venus OS device☆33Updated last year
- ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters☆31Updated 3 years ago
- An arduino sketch to connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266 and monitor using the Blynk mobile app - …☆61Updated 4 years ago