Alternatives and similar repositories for cell-monitor

Users that are interested in cell-monitor are comparing it to the libraries listed below

• stuartpittaway / diyBMS-CurrentShunt
  Isolated current, voltage and SOC monitor for battery banks up to 85V
  ☆54Updated 2 years ago
• tvixen / diy-BMS-with-Arduino-Nano
  If you have a private powerwall of 18650 cells, this is the battery management system you need. The small PCB is equipped with the cheap …
  ☆42Updated 6 years ago
• LibreSolar / solarduino-li-ion
  Solar charge controller with integrated 12 V Li-Ion BMS
  ☆15Updated 6 years ago
• tvixen / 4KW-230V-Inverter
  With these schematics and PCB's, it's possible to create a 230V AC 4KW inverter. The main processor is based on Arduino Nano, with help f…
  ☆60Updated 3 years ago
• OpenSourceEBike / BMSBattery_S_controllers_firmware
  ☆63Updated 3 years ago
• fmeschia / esr-meter
  Arduino-based battery internal resistance meter
  ☆45Updated 8 years ago
• aplavins / Arduino-MPPT
  Arduino based Maximum Power Point Tracking (MPPT) solar charge controller
  ☆79Updated 6 years ago
• MartinStokroos / openMicroInverter
  An open hardware platform for experimenting with DC-to-AC conversion, power and energy metering and grid tie inverters.
  ☆70Updated last year
• dimecho / Open-Inverter-WebInterface
  Open Inverter - Alternative Web Interface
  ☆32Updated 3 years ago
• bres55 / Smart-BMS-arduino-Reader
  ☆62Updated 6 years ago
• jsphuebner / inverter-hardware
  Eagle schematics of inverter main board, sensor boards and gate drivers
  ☆71Updated 3 years ago
• rin67630 / Drok-Juntek-on-steroids
  Extend the possibilities of cheap digital power supplies with a WiFi module
  ☆59Updated last year
• willburk97 / ESP32-BMS
  Work in progress. Single ESP32 monitoring and balancing multiple cell Li-Ion battery.
  ☆22Updated 3 years ago
• KingQueenWong / bmsbattery_s06s_controller_hardware
  S06S 250W Torque Simulation Sine Wave Controller
  ☆14Updated 7 years ago
• ceech / BQ76920-BMS
  ☆36Updated 6 years ago
• reivax-boucoi / Electronic_Load
  DIY Electronic load for DCDC converter characterization
  ☆50Updated 4 years ago
• Iggnus / cheali-charger-i1
  cheap lipo charger
  ☆31Updated last year
• microfarad-de / li-charger
  Arduino firmware for a Lithium-Ion battery charger
  ☆41Updated 10 months ago
• sebdehne / DehneEVSE-Hardware
  DehneEVSE - EV Type 2 Charging station
  ☆15Updated 4 years ago
• collin80 / FirmwareReceiver
  ☆14Updated 9 years ago
• stuartpittaway / diyBMSv4Code
  Software for diyBMS v4
  ☆150Updated 11 months ago
• LibreSolar / bq769x0-arduino-library
  Arduino-compatible library for battery management system based on Texas Instruments bq769x0 analog frontend (bq76920, bq76930 and bq76940…
  ☆46Updated 4 months ago
• OpenSourceEBike / TSDZ2_motor_controller_v2
  ☆29Updated last year
• TechAUmNu / A200S
  A200S ESC - Based upon the VESC®*-Project
  ☆52Updated 6 years ago
• carneeki / OpenVFD
  Variable Frequency Drive for ATmega328 based Arduinos
  ☆84Updated 7 years ago
• dronecz / ESP32-Reflow-Controller
  Reflow controller with ESP32 and TFT LCD on board.
  ☆68Updated last month
• dexterbg / Twizy-Virtual-BMS
  This is an Arduino library providing an emulation of the CAN communication protocol of the BMS (battery management system) on a Renault T…
  ☆86Updated 2 years ago
• craigpeacock / Huawei_R4850G2_CAN
  Example code to communicate with Huawei R4850G2 Power Supply via CAN
  ☆72Updated last year
• OpenEVSE / OpenEVSE_PLUS
  OpenEVSE Hardware
  ☆188Updated 4 months ago
• ArminJo / Ultimate-Battery-Tester
  The ultimate battery tester with ESR measurement and discharge graph. Based on an Arduino Nano and a 1602 LCD.
  ☆52Updated last month