Alternatives and similar repositories for BalancingRobotFullSize

Users that are interested in BalancingRobotFullSize are comparing it to the libraries listed below

• KitSprout / QCopterNano
  微型四軸飛行器 ( M2M ~80mm )
  ☆26Updated 11 years ago
• bitcraze / crazyflie-electronics
  Datasheets and KiCad project files for the Crazyflie electronics design.
  ☆61Updated 9 years ago
• limhyon / esc32
  ESC32
  ☆13Updated 12 years ago
• TKJElectronics / Balanduino
  Git repository for the Balanduino balancing robot
  ☆135Updated 3 years ago
• paparazzi / ppm-encoder
  PPM Encoder board http://paparazzi.enac.fr/wiki/ATmega_PPM_Encoder_Board
  ☆31Updated 13 years ago
• TKJElectronics / XV11Lidar_STM32F429
  Neato XV-11 LIDAR connected to an STM32F429IDISCOVERY board for 360-degree range scanning and measurement
  ☆41Updated 11 years ago
• pololu / libpololu-avr
  The Pololu AVR C/C++ Library makes it easier to get started programming your Orangutan Robot Controller or 3pi Robot.
  ☆44Updated 3 years ago
• EvvGC / Hardware
  Open Source 3 Axis Board Design files
  ☆91Updated 11 years ago
• bitcraze / crazyflie2-stm-bootloader
  Crazyflie 2.0 STM32F4 bootloader
  ☆43Updated 2 years ago
• lawsonkeith / budget-balance-bot
  The budget balance bot project - a sub £50 easybuild balance bot / balancing robot platform with bluetooth control
  ☆29Updated 11 years ago
• Crazepony / crazepony-remote-none
  Crazepony remote control source code with no RTOS.
  ☆67Updated 10 years ago
• esden / open-bldc-mk
  A sideproject of Open BLDC. Open source Firmware for Mikrokopter BrushLess DC Motor controllers.
  ☆22Updated 15 years ago
• NordicPlayground / nrf52-quadcopter
  ☆62Updated 9 years ago
• ginge / OpenServo
  OpenServo code and applications
  ☆97Updated 10 years ago
• KitSprout / QCopterMachineVision
  攝像板 MachineVision，使用 STM32F429ZG
  ☆32Updated 9 years ago
• dccharacter / STM32_Servo_Controller
  STM32-based servo/CNC/3D-printer controller
  ☆44Updated 13 years ago
• TheDIYGuy999 / Mega_PLC
  An open source Arduino industrial PLC
  ☆44Updated 3 years ago
• mahowik / MahoRotorF4-Discovery
  Port of BaseFlight (with MultiWii 2.3 features) for STM32F4DISCOVERY board + GY-86 (mpu6050 + hmc5883 + ms5611) sensors board
  ☆15Updated 11 years ago
• x893 / MotionDriver6
  InvenSense Motion Driver 6.0 beta
  ☆27Updated 8 years ago
• esden / open-bldc
  OpenSource Brushless Drive Controller - The official repository is at http://github.com/open-bldc/open-bldc
  ☆110Updated 12 years ago
• x893 / CNC-STM32
  STM32 based CNC controller
  ☆107Updated 10 years ago
• rpicopter / MotionSensorExample
  MPU6050/MPU6500/MPU9150/MPU9250 over I2c for RaspberryPi
  ☆139Updated 11 years ago
• TKJElectronics / BalanduinoAndroidApp
  Remote control app for the Balanduino balancing robot
  ☆36Updated 9 years ago
• Dark-Guan / Ananas
  This is an Arduino based program for step motor controller,Ananas.
  ☆51Updated 8 years ago
• kriswiner / MPU6050HMC5883AHRS
  9 DoF sensor fusion with AHRS output for MPU-6050 gyro/accel + HMC5883 magnetometer sensor
  ☆31Updated 4 years ago
• OpenCyphal-Garage / gui_tool
  Legacy cross-platform GUI application for UAVCAN/CAN v0 bus management and diagnostics. Does not support UAVCAN v1; for that, see Yukon.
  ☆87Updated 3 years ago
• MakerLabMe / STM32_Arduino_Cores
  STM M3 ARM Cores for Arduino IDE.Makes Arduino IDE supports stm32f103.
  ☆146Updated 9 years ago
• seamatech / arduino-bldc
  The brushless DC motor driver by arduino uno, suport sensored and sensorless BLDC motor
  ☆39Updated 3 years ago
• vedderb / svm_sim
  A Space Vector Modulation (SVM) simulator for FOC analysis
  ☆19Updated 7 years ago
• raspilot / Hardware
  raspilot hardware
  ☆18Updated 10 years ago