Lauszus / LaunchPadFlightControllerAndroidLinks
Android app for my LaunchPad FlightController: https://github.com/Lauszus/LaunchPadFlightController
☆17Updated 7 years ago
Alternatives and similar repositories for LaunchPadFlightControllerAndroid
Users that are interested in LaunchPadFlightControllerAndroid are comparing it to the libraries listed below
Sorting:
- IMU Development Kit,Nano version of SmartIMU☆11Updated 8 years ago
- Very Light-Weight Efficient Onboard Image Processing Library in C☆28Updated 6 years ago
- Zubax GNSS module☆55Updated 10 months ago
- Remote control app for the Balanduino balancing robot☆35Updated 9 years ago
- Android USB host serial driver library for CDC, FTDI, Arduino and other devices.☆15Updated 9 years ago
- Piksi hardware design.☆77Updated 9 years ago
- 微型四軸飛行器 ( M2M ~80mm )☆24Updated 10 years ago
- Zubax Orel BLDC motor controller☆10Updated 6 years ago
- Port of BaseFlight (with MultiWii 2.3 features) for STM32F4DISCOVERY board + GY-86 (mpu6050 + hmc5883 + ms5611) sensors board☆15Updated 11 years ago
- TM4C123G based Flight Controller☆81Updated 5 years ago
- Neato XV-11 LIDAR connected to an STM32F429IDISCOVERY board for 360-degree range scanning and measurement☆41Updated 10 years ago
- Datasheets and KiCad project files for the Crazyflie electronics design.☆60Updated 9 years ago
- TensorFlow package for Cortex-M0-Plus, Cortex-M4, Cortex-M7, and Cortex-M55 CPUs.☆41Updated last year
- Solar MPPT Charger Implemented with BQ24650 MPS430 MCU☆19Updated 8 years ago
- raspilot hardware☆18Updated 9 years ago
- A low cost 3D laser scanner created by RoboPeak☆53Updated 12 years ago
- Paparazzi UAV hardware☆149Updated 8 years ago
- read NMEA data from serial GPS receiver (and sonar and optical sensor) and offer it as I2C slave using ATTiny☆22Updated 11 years ago
- AutoQuad ground control and setup application for Windows, OSX and Linux.☆23Updated 8 years ago
- Code for my full size balancing/segway robot☆60Updated 7 years ago
- An android ground controller (and other things) for Mavlink/Arduplane☆144Updated 7 years ago
- Firmware for Infinity brushless motor controllers☆24Updated 4 years ago
- ☆33Updated 11 years ago
- Draws a 3D representation of an IMU's orientation. Developed for Raspberry Pi and OpenGL ES. Works with minimu9-ahrs.☆51Updated 2 years ago
- Crazyflie 2.0 nRF51 firmware☆66Updated 4 months ago
- The Crazyflie Nano Quadcopter client for Android OTG or BLE enabled devices☆106Updated 3 months ago
- RTIMULib makes it easy to use 9-dof IMUs with embedded Linux systems (especially the Raspberry PI!)☆49Updated 4 years ago
- UAVCAN is a lightweight protocol designed for reliable communication in aerospace and robotic applications via CAN bus.☆36Updated 3 years ago
- Software for open-source motorized CS zoom lens controller☆26Updated 5 years ago
- Flone Remote: Android App for flying Multiwii based quadcopters.☆48Updated 9 years ago