RollingGecko / ArduBoardControlerLinks
Arduino based remote for VESC with nRF24
☆44Updated 7 years ago
Alternatives and similar repositories for ArduBoardControler
Users that are interested in ArduBoardControler are comparing it to the libraries listed below
Sorting:
- Arduino library to interface with the VESC bldc over UART.☆151Updated 4 years ago
- Active precharce circuit with optional switch input☆51Updated 10 years ago
- In this project, I want to read out telemetry data of the "VESC" speed controller by Benjamin Vedder via UART and display it on an OLED d…☆37Updated 9 years ago
- personal improvements/changes to the vedder antispark switch☆66Updated 7 years ago
- ☆45Updated 7 years ago
- BLDC Motor Controller based on the VESC 4.12 hardware☆74Updated 5 years ago
- BLE-UART bridge for the VESC with packet handling and VESC Tool compatibility☆71Updated last year
- AVR-based PPM to USB-Joystick Converter using V-USB☆60Updated 11 years ago
- This motor driver is designed to be interfaced from a host microcontroller by I2C and be able to control the motor with a PID autonomousl…☆33Updated 3 years ago
- A200S ESC - Based upon the VESC®*-Project☆54Updated 6 years ago
- Arduino controlled Spot Welder for battery welding☆78Updated 7 years ago
- Software for the Pedelec/E-Bike controller based on Arduino hardware, see www.pedelecforum.de "ForumsController"☆87Updated 4 years ago
- ☆30Updated 8 years ago
- 3D printed self balancing robot using and ESP32 for the brains, MPU6050 for gyros & accelerometres and DRV8825 to drive the 2 servo motor…☆83Updated 8 years ago
- ESP32 port of JJRobots brilliant B-ROBOT_EVO2☆59Updated 3 years ago
- An interrupt based PPM signal reader for Arduino☆80Updated 4 years ago
- Code for generating 3 phase sine wave on Arduino Uno PWM outputs☆30Updated 8 years ago
- Simple Median Filter library designed for the Arduino Platform☆62Updated 4 years ago
- Arduino based USB Linker protocol☆63Updated 6 years ago
- ☆27Updated 7 years ago
- A sample Arduino sketch to drive one motor using the self balancing scooter motor controller - for 3.3V Arduino ONLY!☆38Updated 9 years ago
- ☆17Updated 11 years ago
- Closed loop servo control for stepper motors☆10Updated 9 years ago
- ☆65Updated 3 years ago
- This is a library to make use of the Hardware Timers present in the STM32F line of Microcontrollers.☆17Updated 9 years ago
- Arduino controler for a closed-loop stepper motor☆87Updated 10 years ago
- A CNC controller to use and test Grbl_ESP32☆79Updated 5 years ago
- ☆43Updated 8 years ago
- ☆52Updated 7 years ago
- v202 2.4G arduino receiver☆63Updated 9 years ago