Alternatives and similar repositories for FD-Autoplacer

Users that are interested in FD-Autoplacer are comparing it to the libraries listed below

• SYZYGYfpga / pcb-templates
  Template PCB's for SYZYGY board designs
  ☆21Updated 2 years ago
• esden / KiBus
  KiCad bus length matching script.
  ☆30Updated 11 months ago
• mattvenn / ws2812-core
  verilog core for ws2812 leds
  ☆33Updated 3 years ago
• mkvenkit / humble_ice
  A low cost FPGA development board based on Lattice iCE40UP5k and Raspberry Pi RP2040.
  ☆44Updated 2 years ago
• dan-rodrigues / pico-hx
  PCB combining Raspberry Pi Pico and iCE40 FPGA
  ☆32Updated last year
• mithro / kicad-pmod
  KiCad Library to make it easy to create both host boards and expansion boards and which are compatible with the Digilent "PMOD" specifica…
  ☆39Updated 4 years ago
• icebreaker-fpga / icebreaker-v2-usb-firmware
  Firmware to implement USB communications on the CH32V307 microcontroller
  ☆11Updated 2 years ago
• 30350n / free2ki
  FreeCAD to KiCad 3D model exporter
  ☆43Updated 3 months ago
• no2fpga / no2bootloader
  USB DFU bootloader gateware / firmware for FPGAs
  ☆65Updated 7 months ago
• 360nosc0pe / scope
  Siglent SDS1x0xX-E FPGA bitstreams
  ☆41Updated 5 months ago
• intergalaktik / ulx4m
  PCB for ULX4M FPGA R&D board
  ☆51Updated last month
• folknology / IceCore
  IceCore Ice40 HX based modular core
  ☆46Updated 4 years ago
• enjoy-digital / litex_rp2040_pmod_test
  Test of a RP2040 PMOD attached to a LiteX SoC.
  ☆25Updated 2 years ago
• lambdaconcept / amaranth-to-litex
  Use amaranth-to-litex to simply import Amaranth code into a Litex project.
  ☆15Updated last year
• xobs / lxbuildenv
  Simplified environment for litex
  ☆14Updated 4 years ago
• goran-mahovlic / ulx3s-extensions
  PMOD boards for ULX3S
  ☆43Updated last year
• ulixxe / usb_dfu
  Full Speed USB DFU interface for FPGA and ASIC designs
  ☆17Updated last year
• Chalandi / Blinky_Pico2_dual_core_nosdk
  Bare-metal programming on RP2350 dual-core ARM Cortex-m33/RISC-V Hazard3 (non-SDK)
  ☆14Updated 2 weeks ago
• openXC7 / openXC7-snap
  snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support
  ☆28Updated 10 months ago
• gregdavill / CH32V003-makefile-example
  CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs
  ☆16Updated 2 years ago
• mattvenn / vga_clock_pcb
  Open source hardware down to the chip level!
  ☆30Updated 3 years ago
• tinyvision-ai-inc / pico-ice-sdk
  Firmware and software support for the pico-ice board
  ☆57Updated last week
• joshajohnson / ecp5-mini
  ECP5 FPGA in an "S7 Mini" form factor
  ☆80Updated 3 years ago
• ECP5-PCIe / ECP5-Utils
  Utilities for the ECP5 FPGA
  ☆18Updated 3 years ago
• mwelling / rp2040-pmod
  RP2040 MCU based PMOD
  ☆20Updated 6 months ago
• tvelliott / dsp_ice
  ICE40 8K FPGA / STM32F4 development system
  ☆61Updated 7 years ago
• lawrie / ulx3s_bit_streams
  Bit streams forthe Ulx3s ECP5 device
  ☆17Updated 2 years ago
• OLIMEX / iCE40HX8K-EVB
  iCE40HX8K development board with SRAM and bus for fast ADC, DAC, IOs
  ☆35Updated 6 months ago
• steieio / pico-dirty-blaster
  Collection of Raspberry Pi Pico board adapters for use with Pico-DirtyJTAG
  ☆13Updated 11 months ago
• joshajohnson / iCE40-feather
  iCE40UP5K in an Adafruit Feather form factor
  ☆23Updated 2 years ago