DaveBlackH / NissanLeafBMS
Arduino Code to query a Nissan Leaf BMS for Pack information.
☆10Updated 4 years ago
Alternatives and similar repositories for NissanLeafBMS:
Users that are interested in NissanLeafBMS are comparing it to the libraries listed below
- Tips and tricks on repairing the fragile ZE0 LEAF PTC heater☆11Updated 2 years ago
- Nissan Leaf based EV conversions☆10Updated 2 years ago
- Software for correcting instrumentation on a battery "bruteforce" upgraded LEAF☆22Updated 4 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆58Updated 3 years ago
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆46Updated last year
- A SOC meter for the dash of a Nissan Leaf 2011/2012☆13Updated 2 years ago
- Software for Damien Maguire's CHAdeMO controller☆19Updated 4 years ago
- diy BMS version 4 for Nissan Leaf cells☆20Updated 3 years ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆15Updated last year
- C# app that shows a simple way to calculate the CRC byte used by some canbus frames in Nissan Leafs☆11Updated 10 years ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆12Updated 10 months ago
- Collection of CAN logs from different electric vehicles☆29Updated 4 months ago
- My version of the Heubner open source electric vehicle motor inverter. All files in Designspark 8 format.☆11Updated 7 years ago
- ESP32 Based Chademo implementation☆15Updated 4 months ago
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆11Updated last year
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆15Updated last week
- ☆10Updated last year
- Commands for pairing batteries☆27Updated 3 years ago
- Can Filter with STM32F105RBT Reverse Engeneering☆35Updated 2 years ago
- Software for adjusting AC charge speed on the Nissan Leaf☆32Updated 4 years ago
- ☆14Updated 5 months ago
- Software for upgrading a 24kWh env200 to 40kWh with a Muxsan CAN-bridge☆26Updated 7 months ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆74Updated last month
- Redacted code for Rust-based Charge Port Controller☆11Updated 4 years ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆55Updated last month
- Mazda RX8 instrument cluster CAN bus control demo☆10Updated 8 years ago
- Arduino projects for the Boxster☆20Updated 4 years ago
- leaf spline revers engineering☆12Updated 4 years ago
- Software for extracting more power from LEAF inverter upgrades. Enables 110kW and 160kW inverters to function with the older LEAF☆66Updated last month
- An opensource solution for connecting OBD2 straight to the Nissan Leaf battery☆50Updated 4 months ago