Alternatives and similar repositories for mcba_firmware

Users that are interested in mcba_firmware are comparing it to the libraries listed below

• IntergatedCircuits / CanDybugFW
  CAN bus gateway over USB
  ☆21Updated 3 years ago
• cvra / CAN-USB-dongle-fw
  slcan firmware for the CVRA CAN to USB dongle
  ☆37Updated 4 years ago
• linklayer / cantact-pro-fw
  Firmware for the CANtact Pro
  ☆47Updated 2 years ago
• roboterclubaachen / usb2can
  ☆52Updated 5 years ago
• krumboeck / usb2can_firmware
  ☆17Updated 9 years ago
• togglebit / CANFDuino
  ☆30Updated last year
• vladisenko / USB-CAN
  Yet another USB-CAN adapter.
  ☆13Updated 3 years ago
• normaldotcom / canblaster
  Utility to forward SocketCAN canbus traffic over UDP to Cangaroo and other applications
  ☆24Updated 2 years ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆71Updated 6 years ago
• Catethysis / CAN-viewer
  A simple CAN to USB bridge for STM32F4
  ☆15Updated 12 years ago
• open-bldc / obldc2-firmware
  Open-Source Brushless Drive Controller Firmware
  ☆26Updated 12 years ago
• slimelec / ollie-hw
  ☆72Updated 3 years ago
• GBert / misc
  miscellaneous stuff / unsorted
  ☆99Updated 9 months ago
• DieBieEngineering / DieBieMPPT
  This is my MPPT project I am doing for a solar boat racing application called the DieBieMPPT
  ☆15Updated 7 years ago
• jgressmann / supercan
  This is project SuperCAN. An open source USB to CAN-FD protocol.
  ☆89Updated 2 months ago
• mocona05 / CAN-BUS-TO-USB-UART-STM32F042-
  CAN-BUS TO USB-UART(STM32F042)
  ☆23Updated 9 years ago
• kaktus85 / MightyWattR3
  Resources for MightyWatt R3 electronic load
  ☆31Updated 3 weeks ago
• lujji / blackmagic
  In application debugger for ARM Cortex microcontrollers.
  ☆32Updated 8 years ago
• ryedwards / budgetcan-fw
  Firmware to support gs_usb on most STM32 devices
  ☆49Updated last month
• m10k / canny
  Simple CAN-over-IP gateway
  ☆30Updated 2 years ago
• martonmiklos / STLINK-V3-BRIDGE_libusb
  STLINK-V3-BRIDGE API which does not uses the ST's libSTLinkUSBDriver but uses libusb
  ☆20Updated 2 months ago
• linklayer / cantact-pro-hw
  Hardware design files for the CANtact Pro
  ☆74Updated 5 years ago
• jeanthom / stlink-tool
  Firmware uploader for ST-Link
  ☆70Updated last year
• lujji / st-decrypt
  Utility for encrypting/decrypting ST-Link firmware images
  ☆123Updated 9 years ago
• mrkindustries / openPSU
  An open source linear power supply unit for hobbyists and professionals
  ☆36Updated 3 years ago
• cortexprog / cortexprogfw
  ☆28Updated 5 years ago
• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆87Updated 5 years ago
• devanlai / IBDAP-CMSIS-DAP
  Armstart's CMSIS-DAP firmware implementation in gcc and makefile. Note: this is not the original Armstart repo
  ☆26Updated 5 years ago
• lujji / st-link-dumper
  ST-Link dumper firmware
  ☆53Updated last year
• electronut / ElectronutLabs-Bumpy
  An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.
  ☆34Updated 6 years ago