AK-Homberger / M5Stack-Wifi-NMEA-Display-JSON
A display for the M5Stack connecting via JSON to the NMEA 2000 WiFi Gateway.
☆16Updated 4 years ago
Alternatives and similar repositories for M5Stack-Wifi-NMEA-Display-JSON:
Users that are interested in M5Stack-Wifi-NMEA-Display-JSON are comparing it to the libraries listed below
- An external Buzzer for NMEA2000 / SeaTalk-NG Alarms.☆14Updated last year
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆14Updated 2 years ago
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆38Updated 3 years ago
- Remote control for anchor chain that shows current chain lengtht via WLAN to phone/tablet.☆16Updated 4 years ago
- nmea2000 gateway with ESP32☆74Updated last month
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆31Updated last year
- Remote Control for an Evolution EV-1 Auto Pilot via NMEA2000/SeatalkNG.☆21Updated 3 years ago
- Material für den NMEA2000-Workshop.☆39Updated last year
- Sailor Hat for ESP32 hardware☆45Updated 5 months ago
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 4 years ago
- Inherited object for use NMEA2000 with ESP32 boards☆75Updated 7 months ago
- An ESP32 based gateway to send NMEA2000 PGNs to a SignalK server via WLAN or USB-Serial.☆21Updated 3 years ago
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆77Updated 3 years ago
- nmea2000 gateway with ESP32☆18Updated last month
- An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.☆33Updated 2 years ago
- Open-source electronics for your boat☆47Updated 4 years ago
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆56Updated 3 years ago
- SignalK Node Server Anchor Alarm Plugin☆12Updated last month
- ☆20Updated 2 weeks ago
- ☆17Updated 8 months ago
- Node server plugin that embeds node red☆10Updated last month
- Inherited object for use NMEA2000 library for Arduino Boards with MCP2515 CAN bus controller.☆20Updated 3 years ago
- Node red nodes for use with the signalk-node-red plugin☆13Updated 3 weeks ago
- This repository shows how to build a Seatalk Autopilot Remote Control device based on an Arduino ProMicro and a simple 433 MHz KeyFob.☆65Updated last year
- Plugin to convert Signal K to NMEA2000☆23Updated 3 months ago
- ESP8266 based SignalK Wifi Sensors☆40Updated 3 years ago
- NMEA 2000 to Signal K transformer☆27Updated 3 months ago
- NMEA0183 to Signal K parser☆33Updated 3 months ago
- Reads NMEA0183 messages from two serial lines and forwards multiplexed messages to USB-Serial and WLAN as UDP broadcast.☆12Updated 2 years ago
- An ESP8266-01 WiFi to read NMEA serial data and broadcast UDP to multiple openCPN instances as a Bridge☆32Updated 6 years ago