AK-Homberger / NMEA0183-WiFi-MultiplexerLinks
Reads NMEA0183 messages from two serial lines and forwards multiplexed messages to USB-Serial and WLAN as UDP broadcast.
☆14Updated 2 years ago
Alternatives and similar repositories for NMEA0183-WiFi-Multiplexer
Users that are interested in NMEA0183-WiFi-Multiplexer are comparing it to the libraries listed below
Sorting:
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆15Updated 2 years ago
- An external Buzzer for NMEA2000 / SeaTalk-NG Alarms.☆14Updated 2 years ago
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆41Updated 3 years ago
- An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.☆36Updated 2 years ago
- Remote control for anchor chain that shows current chain lengtht via WLAN to phone/tablet.☆16Updated 4 years ago
- Weather station library dor Espressif ESP32 and AZ-Touch☆13Updated last year
- Alexa controlled alarm system with ESP32-CAM and HC-SR501 PIR module.☆18Updated 3 years ago
- Connect an arduino to a ham radio speaker and command a 12v led strip remotely using DTMF code and signal detection☆12Updated 7 years ago
- Arduino port of the dAISy AIS project for si446x☆18Updated 7 years ago
- This repository shows how to build a Seatalk Autopilot Remote Control device based on an Arduino ProMicro and a simple 433 MHz KeyFob.☆67Updated last month
- nmea2000 gateway with ESP32☆79Updated 3 months ago
- APRS with lora and esp32☆12Updated last year
- Material für den NMEA2000-Workshop.☆42Updated last month
- An ESP32 based gateway to send NMEA2000 PGNs to a SignalK server via WLAN or USB-Serial.☆21Updated 3 years ago
- simple rotor de antena para TinyGS (tinygs.com)☆11Updated 3 years ago
- A display for the M5Stack connecting via JSON to the NMEA 2000 WiFi Gateway.☆16Updated 4 years ago
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆80Updated 3 years ago
- Simple portable HF 50mW-110W SWR/POWER meter based on tandem match and Arduino Nano☆16Updated 9 months ago
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆63Updated 3 years ago
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 4 years ago
- ESP32-based LoRa ground station☆31Updated 4 years ago
- ☆20Updated last year
- Node red nodes for use with the signalk-node-red plugin☆14Updated 3 months ago
- 4FSK HorusBinary V1 and V2 compatible HAB tracker for SX127x and Arduino Pro mini☆11Updated last year
- An antenna analyzer based on K6BEZ design with modifications by DG7EAO.☆10Updated 4 years ago
- LoRa APRS Tracker for Lillygo T-Echo with the option BME280☆8Updated 2 years ago
- Material Needed to Replicate the 100mw Transmitter shown in the YouTube Video☆19Updated 7 years ago
- Custom Firmware for Si4735 Radio☆14Updated 5 years ago
- ESP32 Bluetooth CW Keyboard☆23Updated 7 months ago
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆32Updated last year