jrcutler / NMEA0183
A small NMEA0183 parser
☆18Updated 11 years ago
Alternatives and similar repositories for NMEA0183:
Users that are interested in NMEA0183 are comparing it to the libraries listed below
- CAN Bus Shield - MCP2515&MCP2551☆14Updated 4 years ago
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆38Updated 3 years ago
- Inherited object for use NMEA2000 library for Arduino Boards with MCP2515 CAN bus controller.☆20Updated 4 years ago
- Inherited object for use NMEA2000 with ESP32 boards☆76Updated 8 months ago
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆15Updated 2 years ago
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆57Updated 3 years ago
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 4 years ago
- Sailor Hat for ESP32 hardware☆46Updated 5 months ago
- Open-source electronics for your boat☆47Updated 4 years ago
- Remote Control for an Evolution EV-1 Auto Pilot via NMEA2000/SeatalkNG.☆23Updated 3 years ago
- Object oriented canbus library for Atmel AVR CPUs used with the Arduino IDE.☆40Updated 3 years ago
- Library for handling NMEA0183 messages☆83Updated 7 months ago
- Arduino library for INA226. Deprecated, see link for new library☆18Updated 6 years ago
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆31Updated last year
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆79Updated 3 years ago
- An ESP32 based gateway to send NMEA2000 PGNs to a SignalK server via WLAN or USB-Serial.☆21Updated 3 years ago
- STM32 and AVR128 Printed Circuit Board for creating IOT nodes with the RFM95 LORA chip☆17Updated 3 weeks ago
- ☆18Updated 2 years ago
- ☆92Updated 7 years ago
- Arduino Current Transformer Library☆17Updated 5 years ago
- ☆14Updated 8 years ago
- AcSIP S7XG LoRaWAN/GPS module library☆26Updated 5 years ago
- An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…☆38Updated 5 years ago
- A driver for the NMEA2000 library and standard linux socketCAN devices☆32Updated 5 years ago
- Sharing boat data across NMEA0183/NMEA2000/Bluetooth/IoT/MQTT with Android anchor watcher app and webpage.☆10Updated 11 months ago
- Material für den NMEA2000-Workshop.☆39Updated last year
- Library for using the INA233 ADC/I2C with Arduino. It makes easier the INA233 configuration from the maximum current and maximum voltage …☆10Updated 3 years ago
- STM32 LowPower modes testing☆13Updated 6 years ago
- Arduino Library for CAN Bed☆26Updated 3 years ago
- CAN Dump for esp-idf☆13Updated last week