Alternatives and similar repositories for FabBSD

Users that are interested in FabBSD are comparing it to the libraries listed below

• GraniteDevices / ArgonServoDriveFirmware
  The I/O side ARM MCU firmware for Granite Devices ARGON servo motor drive.
  ☆18Updated 4 years ago
• GenericLab / WildOpenPCR
  Derivate of the OpenPCR Project
  ☆14Updated 8 years ago
• DangerousPrototypes / BusPirateUltraHDL
  Verilog for the Bus Pirate Ultra FPGA
  ☆26Updated 5 years ago
• goran-mahovlic / FPGA-LCD-Driver
  FPGA LVDS LCD driver
  ☆14Updated 9 years ago
• OpticsBench / laser-cut-optics-bench
  Easy to make optics bench using a laser cutter
  ☆26Updated 8 years ago
• pluggee / Juicyware
  Modular, opensource, high performance G-code interpreter and CNC controller written in Object-Oriented C++
  ☆12Updated 4 years ago
• tinkercnc / spi-fpga-driver
  LinuxCNC to fpga-over-spi driver
  ☆25Updated 8 years ago
• matlo / beagleboard-usbsniffer-kernel
  Imported from https://gitorious.org/beagleboard-usbsniffer/
  ☆15Updated 9 years ago
• LinuxCNC / hostmot2-firmware
  HostMot2 FPGA firmware
  ☆21Updated 4 years ago
• CarlosGS / iceDAQ
  Real time data acquisition based on the Lattice ICEstick hardware
  ☆14Updated 8 years ago
• machinekit / EMCApplication
  Machinekit Featured Application for Enhanced Motion Controller from LinuxCNC
  ☆15Updated 4 years ago
• machinekit / mksocfpga
  Hostmot2 FPGA code for SoC/FPGA platforms from Altera and Xilinx
  ☆32Updated last year
• tumanako / tumanako-inverter-fw-motorControl
  ☆23Updated 6 years ago
• marsohod4you / MBFTDI-SVF-Player
  MBFTDI is application which allows to play SVF (Serial Vector Format) files and so execute JTAG commands on FPGA/CPLD chip. Special MBFDT…
  ☆37Updated 3 years ago
• lukeweston / LaserCutter
  CNC laser cutter controller, compatible with LaserSaur but better.
  ☆21Updated 13 years ago
• myriadrf / LimeADPD
  Lime Adaptive Digital Predistortion
  ☆26Updated last year
• racerxdl / LVDS-7-to-1-Serializer
  An Verilog implementation of 7-to-1 LVDS Serializer. Which can be used for comunicating FPGAs with LVDS TFT Screens.
  ☆49Updated 11 years ago
• icerink / iceskate
  A low cost FPGA development board for absolute newbies
  ☆18Updated 6 years ago
• mvsoliveira / PCBpy
  A Cadence Allegro PCB schematics parser and verification tool. Together with IBERTpy can configure, run, and compile Vivado IBERT eye dia…
  ☆13Updated 4 years ago
• apertus-open-source-cinema / axiom-micro-mainboard
  axiom micro mainboard containing the cmos sensor, headers for plugin modules and more
  ☆39Updated 4 years ago
• ultraembedded / riscv_sbc
  A RISC-V SBC based around the LambdaConcept USB2Sniffer FPGA board.
  ☆30Updated 5 years ago
• FPGA-Computer / UPS
  My HaD UPS + Switch Mode Power Supply repository
  ☆16Updated 7 years ago
• openmv / openmv-swd
  Serial Wire Debugger Programmer
  ☆11Updated 2 years ago
• SimeonSimeonovIvanov / DC-Servo
  Analog speed control of Brushed DC Motor
  ☆25Updated last year
• wkoszek / libxbf
  Xilinx Bitstream Format Library. Easily read .bit files from C programs.
  ☆14Updated 9 years ago
• openpnp / grbl
  An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Ar…
  ☆14Updated 3 years ago
• langwadt / grbl_stm32
  grbl for stm32 with nucleo stepper drivers
  ☆33Updated 4 years ago
• makarandkapoor / Circuit_Tree_Designs
  This repository contains embedded hardware designs auto-created from Circuit Tree web application by random requirements generated from p…
  ☆29Updated 6 years ago
• tomverbeure / cisco-hwic-3g-cdma
  Reverse Engineering of the Cisco HWIC-3G-CDMA PCB
  ☆42Updated last year
• gatecat / SNES_MiSTer_ulx3s
  SNES for MiSTer
  ☆15Updated 4 years ago