squadracorsepolito / L9963E_libLinks
☆18Updated 4 months ago
Alternatives and similar repositories for L9963E_lib
Users that are interested in L9963E_lib are comparing it to the libraries listed below
Sorting:
- 16s / 100A Battery Management System☆155Updated 8 months ago
- Battery management system for 4-series li-ion packs☆58Updated 4 years ago
- can bootloader for use with stm32 microcontrollers☆42Updated 3 years ago
- Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.☆15Updated 2 years ago
- slCAN compatible firmware for STM32f103C8T6☆72Updated 3 years ago
- Firmware for the CANable USB to CAN adapter☆209Updated last year
- STM32 CAN-bus bootloader☆76Updated 8 years ago
- Firmware for LibreSolar BMS boards based on bq769x0, bq769x2 or ISL94202☆180Updated 2 months ago
- Main firmware of the Huebner inverter project☆172Updated 3 weeks ago
- A versatile CAN bootloader for the STM32 and friends☆17Updated 7 years ago
- LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.☆79Updated 2 years ago
- Command-line tool to flashing devices by CAN-BUS☆83Updated 5 years ago
- gs_usb compatible firmware for candleLight, cantact and canable☆71Updated 3 years ago
- This is an Open Source Hardware USB to CAN-FD Interface☆66Updated 4 months ago
- Open source project that uses the CANable hardware from protofusion.org☆38Updated 5 years ago
- Implementation of Local interconnect network in c☆75Updated last month
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆60Updated 2 months ago
- Vector VN1610 protocol implementation for cheap STM32F4 hardware☆48Updated 2 years ago
- This is project SuperCAN. An open source USB to CAN-FD protocol.☆84Updated last week
- A CANopen protocol for all systems such as embedded, PC, etc.☆110Updated last year
- Generic modules that can be used in many projects☆30Updated 3 months ago
- The bootloader used to flash our CAN-connected boards☆146Updated 2 years ago
- PCAN firmware for CANtact ( CANable ) or any other similar boards.☆22Updated last year
- Bootloader project to update for example STM32F107 / GD32F107 chips☆15Updated 10 months ago
- Can Example for Arduino Core STM32☆238Updated 6 months ago
- Partial Lawicel/SLCAN implementation at 1 Mb/s CAN speed and 460800 UART baud rate☆29Updated 6 years ago
- Software for Damien Maguire's CHAdeMO controller☆21Updated 4 years ago
- Firmware to support gs_usb on most STM32 devices☆42Updated 3 months ago
- Open-Source: Modular BMS based on LTC68XX & STM32 MCU for up to 400V EV battery pack☆259Updated 3 years ago
- STM32 + MCP2515 CAN Example☆118Updated 2 years ago