sparkfun / OpenLog_Artemis_GNSS_LoggerLinks
The OpenLog Artemis GNSS Logger makes logging raw UBX messages as easy as controlling text menus! This is a special add-on to the OpenLog Artemis.
☆13Updated 8 months ago
Alternatives and similar repositories for OpenLog_Artemis_GNSS_Logger
Users that are interested in OpenLog_Artemis_GNSS_Logger are comparing it to the libraries listed below
Sorting:
- The OpenLog Artemis is an open source datalogger the comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure…☆95Updated 4 months ago
- An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface☆73Updated last month
- OpenIMU - Open Hardware Mini Logger based on ESP32☆42Updated 2 years ago
- A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …☆34Updated 5 years ago
- The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.☆21Updated 8 months ago
- Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.☆96Updated 4 months ago
- Arduino sketches for TinkerRTK using TinkerSend LoRa radios☆13Updated 7 months ago
- fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images☆22Updated 8 months ago
- DUAL or SINGLE GPS bridge between AgOpenGPS an GPS receiver. Works with 2 UBlox to calculate heading+roll. Corrects and filters. ESP32 + …☆41Updated 2 years ago
- Arduino sketches for the TinkerRTK base station and rover communicating over a WiFi network☆11Updated last year
- A simple to use radio modem for long distances using LoRa.☆20Updated last year
- Documentation and firmware for the SparkFun DataLogger IoT line of products.☆20Updated 7 months ago
- AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)☆41Updated 6 years ago
- ☆53Updated 5 years ago
- Real time kinematics base station (ESP32 + ZED-F9P)☆36Updated 2 years ago
- A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.☆23Updated 11 months ago
- u-blox GNSS receiver library light weight for low power tracking application☆26Updated 5 years ago
- Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster☆31Updated 3 years ago
- ☆15Updated last year
- Python library for the UBX protocol☆38Updated 4 years ago
- Arduino and CMake library for communicating with uBlox GPS receivers.☆109Updated last year
- UM982 specific AgOpenGPS Firmware☆13Updated 3 weeks ago
- Mechanical 3D Models in Step AP214 File Format☆48Updated 3 weeks ago
- An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…☆38Updated 5 years ago
- Digi XBee® Cellular Micropython NTRIP Server (for use with Ardusimple)☆7Updated 6 years ago
- Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup☆60Updated last year
- An Arduino library which allows you to communicate seamlessly with the full range of u-blox GNSS modules☆255Updated 4 months ago
- GNSS Base Station based on Raspberry Pi 4B☆44Updated last year
- ☆14Updated 3 years ago
- ☆18Updated 2 years ago