Alternatives and similar repositories for hexapod_spiderbot_model:

Users that are interested in hexapod_spiderbot_model are comparing it to the libraries listed below

• robs-tech-workbench / hexapod_spiderbot_tutorials
  Welcome to the HexaPod Robot Tutorial! This repo offers a step-by-step guide to build a hexapod spider robot. From hardware specs and Ras…
  ☆51Updated last year
• Ryan-Mirch / Aecerts_Hexapod_V1
  ☆141Updated 4 months ago
• almelnz2005 / hexapod
  Using metal horns, M3 Screws, seperated components to make them more 3d printer friendlly
  ☆27Updated 2 years ago
• EddieCarrera / chica-servo2040-simpleDriver
  An RP2040 based servo driver intended to interface with Make Your Pet's Chica android application
  ☆18Updated last year
• CoretechR / ZeroBug
  DIY Hexapod Robot
  ☆263Updated 9 months ago
• Jerome-Graves / yertle
  A 3D Printed Quadrupedal Robot for Locomotion Research.
  ☆103Updated 2 years ago
• maartenweyn / SpotMicro_ESP32
  ☆41Updated 4 years ago
• RobMink / Babybelt
  ☆101Updated last year
• Arctos-Robotics / Arctos-grbl-v0.1
  6 Axis version of Grbl, the open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that …
  ☆52Updated 9 months ago
• cguweb-com / Arduino-Projects
  ☆129Updated 6 months ago
• mithi / hexy
  Code for a hexapod robot
  ☆87Updated 5 years ago
• BenMakesEverything / Ben_CNC_v1
  This repo is for the files, schematics and other info about my CNC router design.
  ☆89Updated 11 months ago
• alpha3141 / X_printer
  foltable 3d printer
  ☆42Updated 5 years ago
• michaelkubina / SpotMicroESP32
  My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of th…
  ☆338Updated 4 months ago
• aaedmusa / 3D-Printed-Robot-Dog
  This is a 12 DOF 3D printed quadrupedal robot that I designed. It uses 12 servo motors, a Polulu maestro servo controller, and a Teensy 4…
  ☆62Updated last year
• mcfazio2001 / JourneyMaker-Positron
  JourneyMaker-Positron. A redesigned version of the Positron V3 3D Printer. Made more accessible, new and improved design, less parts, int…
  ☆156Updated 8 months ago
• aaedmusa / TOPS
  TOPS (Traverser of Planar Surfaces) or "SPOT" backwards is a 3D printed Open Source quadrupedal robot
  ☆247Updated last year
• neuroprod / InsectRobotSimulation
  hexapod
  ☆293Updated 10 months ago
• robaki-dev / robak
  Robak RC DIY car
  ☆142Updated last year
• MakeYourPet / hexapod
  ☆1,174Updated last year
• CallMeSwal / OpenBelt3DPrinter
  Firmware for the OpenBelt 3D Printer (Compiled and Uncompiled)
  ☆20Updated 10 months ago
• XRobots / ServoSmoothing
  ☆191Updated 3 years ago
• MilleniumMills / Millenium-Milo-v1.4
  ☆95Updated 2 years ago
• Ehdrien / Gecko-fileset
  ☆29Updated 2 years ago
• eponra / flatpack
  A foldable fixed-bed-cantilever 3D-printer, that fits into a spoolbox and uses off-the-shelf parts only.
  ☆167Updated 2 months ago
• JHU-Mueller-Lab / Time-Code-for-Multifunctional-3D-Printhead-Controls
  Example code for "Time Code for Multifunctional 3D Printhead Controls"
  ☆46Updated 4 months ago
• Sir-Kuhnhero / Hexapod
  ☆33Updated 11 months ago
• Kbreezy24 / blackbox
  Blackbox is a high end CoreXY Tool Changing 3D Printer. Aiming for reasonable build volume, fast print speeds and high resolution.
  ☆96Updated last month
• Rack-Robotics / Powercore-V1.0-Manual
  Theory and operation of the Powercore V1 EDM PSU
  ☆47Updated last year
• Arctos-Robotics / ROS
  ROS files for Arctos 3D printed robotic arm
  ☆69Updated 10 months ago