jevois / jevois-tutorialsLinks
User and Programmer Tutorials for JeVois
☆14Updated 7 months ago
Alternatives and similar repositories for jevois-tutorials
Users that are interested in jevois-tutorials are comparing it to the libraries listed below
Sorting:
- Software development kit (SDK) for JeVois☆20Updated 7 months ago
- GUI for grbl.☆51Updated 8 years ago
- ESP32_CAM meets Etch-A-Sketch => Etch-a-Selfie☆12Updated 6 years ago
- Branch of Grbl 0.9G provides planned spindle control for lasers☆10Updated 8 years ago
- 3D Printable DLP 3D printer☆47Updated 7 years ago
- Open Source Turtle Robot☆83Updated 2 years ago
- Project of a 3 wheels Robot with a Lidar + RPI PI3+ - 3D printable☆20Updated 3 years ago
- A gcode-sender application for Chrome/ChromeOS.☆61Updated 4 years ago
- UBTECH alpha robot comunication software (www.ubtrobot.com/)☆33Updated 8 years ago
- Micro Robot Arm with ESP32 and 28BY-48 12V steppers☆82Updated 6 years ago
- Affordable and open-source LIDAR based on three VL53L0X ranging sensor.☆68Updated 7 years ago
- Arduino-based firmware for RepRap electonic☆20Updated 17 years ago
- ☆28Updated 8 years ago
- Tadam !☆17Updated 7 years ago
- DIY CNC and CNC Designs☆34Updated 8 years ago
- RAMPS Servo Board. Replaces the X and Y stepper drivers on a RAMPS CNC control board with two channel DC motor quadrature encoder control…☆22Updated 7 years ago
- ☆32Updated 3 years ago
- A Java application, that turns a webcam into a VisiCut compatible network camera with marker detection and perspective correction. Uses O…☆40Updated 4 months ago
- Arduino and Processing code for an A3080 or ADNS3080 optical flow sensor☆44Updated 2 years ago
- a platform independant library to control Lasercutters. This is the base library for VisiCut☆69Updated 10 months ago
- Its a robot that plays tic tac toe.....☆31Updated 5 years ago
- An optical tracking telescope using OpenCV, Raspberry Pi, Arduino, and 3D printed parts☆46Updated 8 years ago
- cad files for cnc machining☆69Updated 5 years ago
- PIDDYBOT is an Open Source Balancing Robot with the aim of teaching PID control.☆43Updated 7 years ago
- Firmware for the DIY Desktop CNC mill project CNC UNO☆17Updated 7 years ago
- A robot to visually track and target an object. (RaspberryPi2 + RaspiCam + OpenCV + Dlib + servos/driver)☆56Updated 9 years ago
- Universal controller for Unipolar stepper motors with encoders and end switches☆12Updated 9 years ago
- The many forks & ports of MicroPython☆48Updated 5 years ago
- CJMCU-531 and ESP32 Web Demo interfacing to a VL53L1X IR time-of-flight sensor☆56Updated 3 years ago
- Adafruit 16-Channel PWM Servo Driver PCB Eagle Files☆64Updated 6 years ago