ansonmak / OASA-CubeSat
Educational Satellite for Learning CubeSat
☆16Updated last year
Alternatives and similar repositories for OASA-CubeSat:
Users that are interested in OASA-CubeSat are comparing it to the libraries listed below
- Software GPS receiver for ESP32☆31Updated 10 months ago
- Home of the Western CubeSat Project☆24Updated 2 years ago
- Horus Binary v2 HAB Tracker☆35Updated this week
- ☆20Updated 8 years ago
- ☆96Updated last year
- DIY digital beamformer using ADALM-PLUTO☆72Updated 11 months ago
- 6DOF simulation of a CubeSat detumbling in LEO under 3-axis magnetic control using a B-dot controller and LPFs in closed-loop feedback.☆19Updated 2 years ago
- The PC/104 FlatSat used for the development and testing of the CubeSat MOVE-II☆19Updated 5 years ago
- RF powermeter with USB-interface☆14Updated 2 years ago
- Hands on labs for the ADALM Pluto SDR☆59Updated 3 years ago
- C/C++ Based SDR Library with dsp blocks☆11Updated 5 months ago
- Astrophotography imaging using a Raspberry Pi and camera☆13Updated 4 years ago
- microlux - an open source CMOS camera for astrophotography and autoguiding☆19Updated 5 years ago
- Calculates torque-maximizing properties of a magnetorquer given specific constraints.☆17Updated 9 months ago
- Attitude determination for CubeSat☆16Updated 8 years ago
- Additional materials to "Design of cooperative communication system based on CubeSat satellites" (master thesis) .☆46Updated 3 years ago
- Hardware design resources for the Artemis Kit, an affordable 1U CubeSat that encompasses all the essential subsystems of a fully operatio…☆21Updated 9 months ago
- ☆69Updated 2 weeks ago
- A repository of information and source files for toolflow-supported hardware☆30Updated 2 years ago
- Library for calculating satellites positions and predicting overpasses.☆56Updated 2 years ago
- An Arduino library to enable communications with the Swarm M138 satellite modem☆28Updated last year
- Design discussions, engineering justifications, and qualification data☆28Updated 3 years ago
- Pycubed PC104 layout design files☆87Updated 2 years ago
- Hardware design files for the Quetzal-1 mission.☆42Updated last month
- Code and files for the Arduino DIY Satellite project (Cubesat)☆38Updated 4 years ago
- 3D-printable reaction wheel capable of active detumbling and attitude control.☆16Updated 3 years ago
- multi MAX2771 GNSS receiver☆28Updated last week
- Telemetry and photos received from the Quetzal-1 mission☆21Updated last month
- Lost: Open-source Star Tracker☆48Updated 5 months ago