regishsu / SpiderRobot
☆105Updated 9 years ago
Alternatives and similar repositories for SpiderRobot:
Users that are interested in SpiderRobot are comparing it to the libraries listed below
- Arduino Quadruped Robot, Spider Robot☆106Updated 9 years ago
- B-ROBOT Arduino self balancing robot from JJROBOTS.com☆110Updated 4 years ago
- ESP8266 based quadruped with 8DOF and oscillator based gaits.☆397Updated 8 years ago
- Self Balance arduino robot. Control via Smartphone. Fully 3D printed project.☆146Updated 10 years ago
- Lynxmotion Phoenix code ported to Trossen PhantomX☆96Updated 8 years ago
- Arduino code for both the Vorpal Hexapod and Vorpal Hexapod Gamepad.☆139Updated 4 years ago
- An 18 DOF Hexpod project using LinkIt Smart 7688 + PCA9685☆73Updated 8 years ago
- Build your own robot like a Ninja 🐱👤 This is the first emotional modular EdTech robot that can walk and roll!☆348Updated 10 months ago
- Software for a 3D Printed Robot Arm☆129Updated 4 years ago
- Self balancing robot (Segway) based on modified/extended MultiWii 2.3 firmware.☆279Updated 4 years ago
- Micro Robot Arm with ESP32 and 28BY-48 12V steppers☆82Updated 5 years ago
- MiniPlan V6☆28Updated 4 years ago
- uStepper Robot Arm STL files and instruction Revision 3☆88Updated 7 years ago
- 3D printed self balancing robot using and ESP32 for the brains, MPU6050 for gyros & accelerometres and DRV8825 to drive the 2 servo motor…☆81Updated 7 years ago
- New and improved version of our Balancing Robot B-ROBOT☆85Updated 7 years ago
- WIP: ESP32 powered robot dog, quadruped robot. This is just code, hardware in the other repositories☆119Updated 2 years ago
- STL files and instructions for uStepper Robot Arm Rev 4☆67Updated 4 years ago
- A 3D printed balancing robot☆73Updated 7 years ago
- Based on the miniKame, modifications to the body of the robot to allow more space, included a ultrasonic sensor. ESP8266 based quadruped …☆28Updated 9 years ago
- ☆73Updated last year
- ☆36Updated 7 years ago
- ☆147Updated 6 years ago
- Arduino - Self balancing robot☆71Updated 11 years ago
- This repository contains the bill of materials, design files, and firmware for building a giant 3D printed robot arm.☆68Updated 6 years ago
- ESP8266 project for Alpha 1S robot control.☆35Updated 5 years ago
- ESP32 port of JJRobots brilliant B-ROBOT_EVO2☆58Updated 3 years ago
- Capers II is a hexapod robot with three degrees of freedom per leg.☆52Updated 7 years ago
- 3d printable Robot arm☆40Updated 7 years ago
- An open-source and fully hackable biped robot.☆157Updated 8 years ago
- Arduino controler for a closed-loop stepper motor☆86Updated 10 years ago