pomeroyb / Create2ControlLinks
A python library for controlling the iRobot Create2
☆20Updated 6 years ago
Alternatives and similar repositories for Create2Control
Users that are interested in Create2Control are comparing it to the libraries listed below
Sorting:
- Ros nodes for single TeraRanger sensors☆24Updated 3 years ago
- Ultra-simple Python API for iRobot Create 2☆21Updated 8 years ago
- Groovy ROS node for camera module of Raspberry Pi☆77Updated 10 years ago
- ROS driver for Parrot Bebop Drones 1.0 & 2.0☆162Updated 2 years ago
- ROS driver for Parrot AR-Drone 1.0 and 2.0 quadrocopters☆361Updated 7 years ago
- A ROS driver and firmware to connect to Sparkfun OpenLog Artemis, 9DoF Razor IMU M0, 9DOF Razor IMU and 9DOF Sensor Stick. These boards c…☆94Updated 3 years ago
- Face Detection and Tracking for ROS☆39Updated 2 years ago
- Autonomous RC Car Project☆75Updated 6 years ago
- Flying Robot Operating System is designed to be the open source implementation example for your DIY drone.☆59Updated 5 years ago
- Generic Sensor Fusion Package for ROS☆28Updated 10 years ago
- This repository is currently RETIRED, UNSUPPORTED, and UNMAINTAINED☆49Updated 6 years ago
- Ros node for iRobot Create 2☆48Updated 3 years ago
- Scanse Sweep ROS Driver and Node☆68Updated 4 years ago
- The official ROS package of Guidance SDK for 32/64 bit Ubuntu and XU3☆80Updated 8 years ago
- Repository for the tum_ardrone ROS package, implementing autonomous flight with PTAM-based visual navigation for the Parrot AR.Drone.☆228Updated 7 years ago
- ROS Driver for Android Sensors☆86Updated 6 years ago
- OpenKAI: A modern framework for unmanned vehicle and robot control☆249Updated this week
- Vision-based external localization system. NOTE: not currently being developed☆76Updated 6 years ago
- A GUI for controlling the Crazyflie with ROS input/output☆88Updated 10 years ago
- Tutorial for the setup of ROS Gazebo SITL for Ardupilot☆24Updated 9 years ago
- Visual odometry based on Intel® RealSense™ devices☆51Updated 6 years ago
- Your own autonomous drone in ROS.☆35Updated 5 years ago
- ☆16Updated 6 years ago
- Interface of DJI autopilot based on its OSDK (3.2)☆168Updated 6 years ago
- ROS node that reads the MPU9250 accelerometer, gyroscope and AK8963 magnetometer and publishes a sensor_msgs/Imu topic.☆35Updated 5 years ago
- Tools for crosscompiling ROS2 for the Raspberry Pi☆48Updated 7 years ago
- Vision based control for object following in UAVs☆93Updated 4 years ago
- A small package to use the RTIMULib in ROS☆31Updated 2 years ago
- Docker Image wrappers and config scripts for various ROS (Robot Operating System) packages☆47Updated 9 years ago
- ROS driver for VN-100 of VectorNav Technologies☆44Updated last year