Alternatives and similar repositories for icm20948-python:

Users that are interested in icm20948-python are comparing it to the libraries listed below

• micropython-IMU / micropython-mpu9x50
  Drivers for InvenSense inertial measurement units MPU9250, MPU9150, MPU6050
  ☆265Updated 4 months ago
• drcpattison / ICM-20948
  ICM-20948 port of the MPU-9250 Kris Winer Arduino library
  ☆38Updated 2 years ago
• sparkfun / qwiic_9dof_imu_icm20948_py
  Python module for the SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic)
  ☆32Updated 2 weeks ago
• drcpattison / DPEng_ICM20948_AK09916
  DPEng's Arduino library for the ICM-20948 breakout board with magnetometer calibration and AHRS examples
  ☆27Updated 2 years ago
• adafruit / Adafruit_CircuitPython_GPS
  GPS parsing module for CircuitPython. Meant to parse NMEA data from serial GPS modules.
  ☆78Updated last month
• tuupola / micropython-mpu9250
  MicroPython I2C driver for MPU9250 9-axis motion tracking device
  ☆152Updated last year
• micropython-IMU / micropython-fusion
  Sensor fusion calculating yaw, pitch and roll from the outputs of motion tracking devices
  ☆332Updated 4 years ago
• dtornqvist / icm-20948-arduino-library
  ☆25Updated 6 years ago
• adafruit / Adafruit_CircuitPython_BNO055
  CircuitPython driver for BNO055 absolute orientation sensor
  ☆88Updated last month
• niru-5 / imusensor
  Python library for communication between raspberry pi and MPU9250 imu
  ☆107Updated 2 years ago
• adafruit / Adafruit_CircuitPython_LSM9DS1
  CircuitPython module for the LSM9DS1 accelerometer, magnetometer, gyroscope.
  ☆23Updated last month
• ricardozago / GY91-MPU9250-BMP280
  Libraries for use with GY91 10 dof board (MPU9250, MPU9255 and BMP280).
  ☆57Updated 6 years ago
• adafruit / Adafruit_BNO08x
  Arduino library for BNO08x
  ☆47Updated last year
• pimoroni / bmp280-python
  Python library for the BMP280 temperature, pressure, and altitude sensor.
  ☆59Updated 8 months ago
• sparkfun / SparkFun_ICM-20948_ArduinoLibrary
  Arduino support for ICM_20948 w/ portable C backbone
  ☆173Updated 4 months ago
• jarzebski / Arduino-KalmanFilter
  Kalman Filter for Arduino
  ☆95Updated 7 years ago
• jremington / AltIMU-AHRS
  Arduino Madgwick/Mahoney AHRS filters for the Pololu AltIMU9 and 10 series of 9 and 10DOF sensors. Includes code for sensor calibration.
  ☆24Updated 7 months ago
• ZaneL / Teensy-ICM-20948
  Arduino library for the ICM-20948 motion tracking sensor -- with DMP support
  ☆68Updated 3 years ago
• jremington / ICM_20948-AHRS
  Mahony Fusion Filter and Tilt compensated compass for ICM_20948
  ☆44Updated last month
• RTIMULib / RTIMULib-Arduino
  ☆32Updated 8 years ago
• adafruit / Adafruit_AHRS
  Arduino library for AHRS (Attitude and Heading Reference System) for Adafruit motion sensors
  ☆227Updated 11 months ago
• sparkfun / SparkFun_BNO080_Arduino_Library
  An Arduino Library for the BNO080 IMU combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running pow…
  ☆82Updated last year
• bluerobotics / BlueRobotics_MS5837_Library
  Arduino library for the MS5837 pressure sensor.
  ☆58Updated 3 years ago
• pimoroni / vl53l1x-python
  Python library for the VL53L1X Laser Ranger
  ☆98Updated 3 years ago
• gregtomasch / EM7180_SENtral_Calibration
  Get the best AHRS accuracy out of the Tlera USFS with good sensor calibration
  ☆22Updated 6 years ago
• adafruit / Adafruit_FXOS8700
  Driver for the Adafruit FSOX8700 Accelerometer/Magnetometer Breakout
  ☆14Updated last year
• MarkSherstan / MPU-6050-9250-I2C-CompFilter
  MPU6050/9250 I2C and SPI interface. Sensor fusion using a complementary filter yields sensor Euler angles and is implemented in five diff…
  ☆99Updated 2 years ago
• jordandcarter / RTIMULib-Arduino
  ☆19Updated 3 years ago
• jefmenegazzo / mpu-i2c-drivers-python
  I2C Drivers for MPU-9250, MPU-9255, MPU-9150, MPU-6500, MPU-6555, and MPU-6050
  ☆76Updated 2 years ago
• RigacciOrg / py-qmc5883l
  Python driver for the QMC5883L 3-axis magnetometer, developed for the Raspberry Pi
  ☆69Updated 2 years ago