Alternatives and similar repositories for USB-Blaster_UART

Users that are interested in USB-Blaster_UART are comparing it to the libraries listed below

• no2fpga / no2bootloader
  USB DFU bootloader gateware / firmware for FPGAs
  ☆69Updated last year
• splinedrive / my_hdmi_device
  New clean hdmi implementation for ulx3s, icestick, icoboard, arty7, colorlight i5 and blackicemx! With tmds encoding hacked down from dvi…
  ☆104Updated 3 months ago
• nand2mario / ddr3-tang-primer-20k
  DDR3 controller for Tang Primer 20K (Gowin GW2A-18C fpga). DDR3-800 speed and low latency.
  ☆66Updated 2 years ago
• verilog-indeed / nano4k_hdmi_tx
  Open-source HDMI/DVI transmitter for the Gowin GW1NSR-powered Tang Nano 4K
  ☆23Updated 3 years ago
• MJoergen / HyperRAM
  Portable HyperRAM controller
  ☆61Updated last year
• nand2mario / usb_hid_host
  A compact USB HID host FPGA core supporting keyboards, mice and gamepads.
  ☆149Updated 8 months ago
• emard / ulx3s-misc
  Miscellaneous ULX3S examples (advanced)
  ☆81Updated 5 months ago
• blackmesalabs / s7_mini_fpga
  Example designs for the Spartan7 "S7 Mini" FPGA board
  ☆29Updated 6 years ago
• 360nosc0pe / scope
  Siglent SDS1x0xX-E FPGA bitstreams
  ☆43Updated 11 months ago
• abhra0897 / gowin-easy-linux
  Easy setup of GoWin FPGA SDK on Linux. A single script (main_launcher) automates all the critical steps and quickly fires up the IDE.
  ☆25Updated 5 years ago
• StereoNinja / StereoNinjaFPGA
  Experimental FPGA project for streaming two MIPI CSI camera streams to an HDMI monitor using a ULX3S FPGA board
  ☆32Updated 2 years ago
• matrix-io / xc3sprog
  xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters …
  ☆132Updated last year
• hansfbaier / colorlight-qmtech-adapter
  Adapter to use Colorlight i5/i9 FPGA boards in a QMTech board form factor
  ☆19Updated 3 years ago
• mithro / kicad-pmod
  KiCad Library to make it easy to create both host boards and expansion boards and which are compatible with the Digilent "PMOD" specifica…
  ☆41Updated 4 years ago
• gtjennings1 / HyperBUS
  A basic HyperRAM controller for Lattice iCE40 Ultraplus FPGAs
  ☆63Updated 6 years ago
• folknology / IceCore
  IceCore Ice40 HX based modular core
  ☆46Updated 4 years ago
• smunaut / iCE40linux
  Gateware / Firmware / BuildRoot to run linux on iCE40 / iCEBreaker
  ☆103Updated 2 years ago
• tomverbeure / ecp5_jtag
  Use ECP5 JTAG port to interact with user design
  ☆32Updated 4 years ago
• zf3 / psram-tang-nano-9k
  An open source PSRAM/HyperRAM controller for Sipeed Tang Nano 9K / Gowin GW1NR-LV9QN88PC6/15 FPGA
  ☆85Updated 3 years ago
• openXC7 / openXC7-snap
  snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support
  ☆29Updated last year
• GMM-7550 / gmm7550-hardware
  CologneChip GateMate FPGA Module: GMM-7550
  ☆27Updated 2 months ago
• Efinix-Inc / xyloni
  This repo is for Efinix Xyloni development board users. It has projects and software to get you started working with the board.
  ☆45Updated 2 years ago
• benitoss / ColorLight_FPGA_boards
  Update IceStudio to support ColorLight 5A-75X, i5 and ICeSugar Pro FPGA boards
  ☆49Updated 2 years ago
• icebreaker-fpga / icebreaker-pmod
  Collection of PMOD boards for the use with iCEBreaker and any other FPGA board that has PMOD connectors.
  ☆92Updated last year
• vmunoz82 / ise14
  EDA Tools: Xilinx ISE 14.7 Dockerfile
  ☆21Updated 3 years ago
• xobs / lxbuildenv
  Simplified environment for litex
  ☆14Updated 5 years ago
• kazkojima / colorlight-i5-tips
  Tiny tips for Colorlight i5 FPGA board
  ☆60Updated 4 years ago
• no2fpga / no2usb
  Nitro USB FPGA core
  ☆85Updated last year
• Wallbraker / SODIMM
  Sodimm components for KiCad
  ☆44Updated 4 years ago
• raetro / sdk-docker-fpga
  Intel Quartus Prime Synthesis Engine for Docker
  ☆52Updated last year