Alternatives and similar repositories for PiPicoPowerMeter

Users that are interested in PiPicoPowerMeter are comparing it to the libraries listed below

• galacticstudios / Logic-Meter
  ☆43Updated 4 years ago
• dwillmore / TSSOP20_breakout
  A generic breakout board for TSSOP20 chips to a SIP header meant for breadboard use
  ☆13Updated 7 months ago
• SyedTahmidMahbub / q-dpico_picprog72
  Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython
  ☆33Updated last year
• wasspaul / sig_gen
  A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico
  ☆58Updated 6 months ago
• tvlad1234 / Pico-10BASE-T-Library
  Library which allows the Pi Pico to send UDP packets over 10BASE-T Ethernet
  ☆9Updated 2 years ago
• NevynUK / PicoDebugger
  Hardware designs for Raspberry Pi Pico debug board.
  ☆23Updated last year
• bluepylons / USB-C-3-way-splitter
  A splitter board (for making a cable splitter) for turning a 5V 3A USB power source to 3 5V 1A USB sources
  ☆32Updated last month
• Mmessiter / LockDownRadioControl
  LockDownRadioControl
  ☆47Updated this week
• takigama / KmartReflowMiniOven
  Reflow Oven from the KMart mini oven
  ☆10Updated 3 months ago
• rallekralle11 / Epi_4L
  4 layer version of the Epi 32U4
  ☆57Updated last year
• alunmorris / Multi-channel-wireless-voltmeter
  ☆14Updated 4 years ago
• wagiminator / ATtiny13-TinyRemoteXL
  12-Button IR Remote Control
  ☆45Updated 2 years ago
• DoganM95 / CH340C-Serial-Programmer
  CH340C based ESP32 programmer module pcb with auto- programming & reset, sponsored by PCBWay.
  ☆39Updated 3 months ago
• oxullo / uctester
  Ultimate Continuity tester
  ☆28Updated 4 years ago
• aidanchandra / serial-plotter
  ☆16Updated last year
• TEC-IST / rp2040-hdmi-1080p-hardware
  ☆35Updated last year
• shraiwi / ATTiny555
  A 555 timer simulator running on the ATTiny85 :)
  ☆63Updated 3 years ago
• bytesizedengineering / mppt-charge-controller
  ☆13Updated 3 months ago
• geoffreygao1 / FS-Plotter
  Plotter attachment for the Ender 3 3D printer to allow for printing onto non-standard materials/objects
  ☆36Updated last year
• AnaviTechnology / anavi-fume-extractor-sw
  Open source Arduino sketch for the smart WiFi dev board ANAVI Fume Extractor
  ☆15Updated 4 years ago
• dilshan / i2c-test-terminal
  I2C hardware test terminal/master mode emulator.
  ☆20Updated 4 years ago
• atc1441 / ATC_stc_solder_iron
  Custom firmware for cheap STC Based Soldering iron using PlatformIO and SDCC 8051 based
  ☆50Updated 2 years ago
• techie66 / CANSerial
  Serial port emulation over CAN bus
  ☆30Updated 2 years ago
• OLIMEX / Ultra-Sound-Levitation
  Ultra Sound Levitation board with two speakers and potentiometer
  ☆21Updated 2 years ago
• markus-seidl / component-tester
  GM328A / KKMOON Transitor / Component Tester Firmware
  ☆39Updated 5 years ago
• arturo182 / serpente_hw
  ☆35Updated 5 years ago
• shufps / vfd-night-projector-clock
  ☆18Updated last year
• limpkin / xt60_parallelizer
  a custom board to monitor custom battery packs
  ☆16Updated last year
• alunmorris / Multi-channel-autorange-OLED-voltmeter
  Minimalist 4-channel 0 to 27V meter using AVR microcontroller and 72x40 OLED display
  ☆19Updated last year
• tinkerbeast / PicoSigGen
  PicoSigGen - Low cost arbitrary waveform generator
  ☆31Updated last year