Alternatives and similar repositories for PicoDebugger

Users that are interested in PicoDebugger are comparing it to the libraries listed below

• wasspaul / sig_gen
  A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico
  ☆60Updated last year
• knifter / DualPID
  Multi Channel Configurable PID regulator on M5Stack Core
  ☆49Updated last year
• testudor / modular-breadboard-base
  Breadboard base with attachment slots for various modules
  ☆36Updated 2 years ago
• dengyutu / CU-Project-Drawing-Robot
  ☆18Updated last year
• SyedTahmidMahbub / q-dpico_picprog72
  Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython
  ☆34Updated last year
• eeucalyptus / ch32v003-usbpd
  Use the ch32v003 as a usb pd controller
  ☆48Updated last year
• c0pperdragon / HotPlate
  ☆34Updated last year
• pmarques-dev / PicoEncoder
  High resolution quadrature encoder using the PIO on the RP2040
  ☆63Updated 7 months ago
• DoganM95 / CH340C-Serial-Programmer
  CH340C based ESP32 programmer module pcb with auto- programming & reset, sponsored by PCBWay.
  ☆40Updated 9 months ago
• wagiminator / ATtiny13-TinyRemoteXL
  12-Button IR Remote Control
  ☆45Updated 2 years ago
• TEC-IST / rp2040-hdmi-1080p-hardware
  ☆36Updated 2 years ago
• tvlad1234 / Pico-10BASE-T-Library
  Library which allows the Pi Pico to send UDP packets over 10BASE-T Ethernet
  ☆10Updated 3 years ago
• jjsch-dev / pico_i2c_sniffer
  i2c sniffer with a Raspberry Pi Pico
  ☆91Updated 4 years ago
• rallekralle11 / Epi_4L
  4 layer version of the Epi 32U4
  ☆58Updated 2 years ago
• oxullo / uctester
  Ultimate Continuity tester
  ☆31Updated 5 years ago
• wntrblm / jellyfish-and-starfish
  ☆109Updated 2 years ago
• benedekkupper / stm32-i2c-hid
  HID over I2C demonstration
  ☆43Updated 2 months ago
• ripred / CPUVolt
  Library for Arduino and ATmega series processors to read the processor's Vcc voltage and percentage of capacity (for battery based projec…
  ☆79Updated 10 months ago
• bluepylons / USB-C-3-way-splitter
  A splitter board (for making a cable splitter) for turning a 5V 3A USB power source to 3 5V 1A USB sources
  ☆36Updated 7 months ago
• DurandA / reflow946
  Bluetooth LE temperature controller for the 946C electronic hot plate
  ☆113Updated last year
• adafruit / PicoDVI
  Bitbanged DVI on the RP2040 Microcontroller
  ☆63Updated 4 months ago
• wagiminator / ATtiny814-Power-Analyzer
  Power Supply Analyzer with USB Interface
  ☆54Updated 2 years ago
• solderparty / rp2xxx_stamp_footprints
  ☆80Updated 10 months ago
• blueOkiris / ch552g-dev-board
  A simple breakout board with minimal hardware design for the CH552g
  ☆18Updated last year
• connornishijima / Pixie_Chroma
  Arduino library and documentation for Pixie Chroma displays!
  ☆55Updated 3 years ago
• NNNILabs / Manhattan-Adapters-Prototyping-Ideas
  SMD adapters for Manhattan-style prototyping.
  ☆45Updated last year
• neubauek / CircuitBrains
  ☆49Updated 2 years ago
• xyphro / I3CBlaster
  Raspberry pico / RP2040 based USB to I3C converter with Python support
  ☆74Updated last month
• witnessmenow / ts100-flex-c-friend
  Info and documentation for the TS100 Flex-C-Friend, an external add-on for TS-100 for adding USB-C PD
  ☆63Updated 5 years ago
• techie66 / CANSerial
  Serial port emulation over CAN bus
  ☆30Updated 3 years ago