dilshan / i2c-test-terminalLinks
I2C hardware test terminal/master mode emulator.
☆20Updated 4 years ago
Alternatives and similar repositories for i2c-test-terminal
Users that are interested in i2c-test-terminal are comparing it to the libraries listed below
Sorting:
- ☆36Updated last year
- Library which allows the Pi Pico to send UDP packets over 10BASE-T Ethernet☆10Updated 3 years ago
- ☆34Updated 2 years ago
- ☆72Updated 3 years ago
- i2c sniffer with a Raspberry Pi Pico☆90Updated 4 years ago
- A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico☆59Updated 10 months ago
- Raspberry pico / RP2040 based USB to I3C converter with Python support☆72Updated 2 months ago
- Power Supply Analyzer with USB Interface☆53Updated 2 years ago
- Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython☆33Updated last year
- RP2040 Minimal hardware (PIO) Ethernet interface + LwIP TCP/IP stack driver☆35Updated last year
- This library enables you to use SPI SD cards with RP2040-based boards such as Nano_RP2040_Connect, RASPBERRY_PI_PICO using either RP2040 …☆45Updated 2 years ago
- A 555 timer simulator running on the ATTiny85 :)☆63Updated 3 years ago
- ☆29Updated 5 years ago
- Use the ch32v003 as a usb pd controller☆46Updated last year
- Using a RP2040 Pico as a basic logic analyzer, exporting CSV data to read in sigrok / Pulseview☆92Updated 4 years ago
- A simple but full featured UART Library for the CH32V003 MCU☆11Updated 6 months ago
- Programming AVRs with another device☆46Updated last year
- simple and cheap 16 channel logic analyzer based on Cypress CY7C68013A development board☆37Updated 5 years ago
- RPi Pico/RP2040 firmware for the Scoppy Oscilloscope☆20Updated 3 years ago
- ☆87Updated last month
- WiSer: Bringing wireless convenience to serial connectivity☆53Updated last year
- 12-Button IR Remote Control☆45Updated 2 years ago
- Raspberry Pi Pico UART-USB-I2C bridge (USB to six UARTs and one I2C)☆63Updated 7 months ago
- A programmer for the ATTiny TPI interface with support for ATTiny102 and ATTiny104.☆20Updated 7 years ago
- This is the PICkitPlus device database repository. This is the device database used by PICkitPlus for the PICkit 2 and PICkit 3 program…☆56Updated last month
- USB controlled I²C OLED☆73Updated last year
- Resources for MightyWatt R3 electronic load☆31Updated last month
- Rotary Encoder with USB Interface☆19Updated last year
- Bitbanged DVI on the RP2040 Microcontroller☆62Updated 3 months ago
- TinyUSB-based logic analyzer code for Sigrok