openwch / nfcLinks
The whole NFC solution (source code and schematic&layout) based on WCH chips
☆43Updated 2 years ago
Alternatives and similar repositories for nfc
Users that are interested in nfc are comparing it to the libraries listed below
Sorting:
- USB-JTAG Adapter Using CH552☆69Updated 3 years ago
- An Open-Source CMSIS-DAP Debug Probe based on DAPLink and USB bus convert and it can realize USB convert to serial interface based in CH5…☆95Updated 10 months ago
- Single-chip solution for Hi-speed USB2.0(480Mbps) JTAG/SPI Debugger based on RISC-V MCU CH32V30x/CH32V20x☆111Updated 2 years ago
- A minimum development board for CH32V203G6.☆44Updated 2 years ago
- OpenOCD source code for CH32V series MCUs released by Mounriver IDE☆54Updated 3 years ago
- AIR32F103 template project for GNU Arm Embedded Toolchain☆33Updated last year
- CH552 Dual USB to Serial Bridge.☆78Updated 10 months ago
- a cheap CMSIS-DAP debugger by an WCH chip named CH549F☆45Updated 4 years ago
- SDK sch&layout reference design and datasheet documention☆62Updated last year
- ☆23Updated 2 months ago
- MicroPython for WCH CH32V307☆37Updated 2 years ago
- CH55x USB to JTAG bridge☆133Updated 3 months ago
- esp32 wifi debugger for ARM Cortex microcontrollers https://github.com/blacksphere/blackmagic☆88Updated last month
- A tiny FPGA core module based on GW1NZ-LV1, CH552 and SLG46580☆24Updated 3 years ago
- Buildroot support for Allwinner V3s/S3/S3L☆45Updated 7 months ago
- A low cost FPGA/CPLD dev-board based on AG1280Q48.☆66Updated 2 years ago
- A low cost small size USB dev board based on WCH CH552.☆88Updated 2 years ago
- USB-Blaster instance on CH55x MCU.☆49Updated 5 years ago
- Opensource embedded controller firmware for sipeed boards.☆39Updated 6 years ago
- USB to dual UART / SPI / I2C / JTAG / FIFO / Bit-Bang...☆137Updated 2 years ago
- ☆35Updated 5 months ago
- OpenOCD for WCH CH32☆21Updated 2 years ago
- ESC(Electronic Speed Controller) source code based on RISC-V CH32☆37Updated last year
- L1 R1 S1: PuyaSemi 24MHz Cortex-M0 MCU (PY32F002A/PY32F003/PY32F030)☆25Updated 2 years ago
- This is the OpenOCD source code modified to support WCHlink and CH32Vxxx MCUs, received from MounRiver after my GPL request, and publishe…☆18Updated 2 years ago
- openocd wchlink for WCH-Link firmware V2.4☆19Updated 2 years ago
- A binary xPack with the GNU RISC-V Embedded GCC toolchain with support of WCH RISCV CH56x... "WCH-Interrupt-fast"☆14Updated 2 years ago
- SFP module test board for Raspberry Pi Pico☆57Updated 10 months ago
- ☆26Updated 6 years ago
- L1 R1:WCH 24MHz MCS-51 USB MCU (CH552T/CH552P/CH552E/CH552G/CH551G)☆55Updated 2 years ago