Alternatives and similar repositories for Arduino_Hot_Air_Gun

Users that are interested in Arduino_Hot_Air_Gun are comparing it to the libraries listed below

• sfrwmaker / TFT_Rework_station
  Soldering and rework station with TFT ili9341 display absed on stm32
  ☆23Updated last year
• brother-yan / LGTISP
  LGT8Fx8P ISP download protocol implementation
  ☆46Updated 5 years ago
• Muny / DIY-JBC-T245-Station
  A DIY JBC T245 soldering iron station.
  ☆44Updated 7 years ago
• soguklehim / hot-air-controller
  Hot air rework controller for generic 858D / 8586 / 8858 / 852 / 878 / 858 hot air guns from China.
  ☆31Updated 5 years ago
• sfrwmaker / T12-JBC-rework-station
  ☆17Updated 2 months ago
• Edragon / LGT
  ☆35Updated 5 years ago
• raspibo / HotAirGun
  Hot Air Gun File, 3D, Sch, Pcb, C
  ☆16Updated 6 years ago
• 981213 / ch347-nor-prog
  Simple CH347 SPI-NOR programmer
  ☆17Updated 2 years ago
• WeActStudio / WeActStudio.WchLinkW
  WCH-LinkW is a wired/wireless 2.4G dual imitation real debugger, which can be used for online debugging and downloading of WCH RISC-V a…
  ☆27Updated 2 years ago
• nppc / HotAirGunController
  Controller for Hot Air Gun with 220v heater and 24v fan
  ☆21Updated 4 years ago
• mean00 / stm32ComponentTester
  ☆37Updated 4 years ago
• WeActStudio / ArduinoCore-AT32F4
  ☆39Updated last year
• openwch / ch34x
  CH340, CH343, CH342, CH344,CH348
  ☆37Updated 2 years ago
• fmeschia / esr-meter
  Arduino-based battery internal resistance meter
  ☆46Updated 9 years ago
• nightseas / boring_logic
  A 16-channel logic analyzer based on CY7C68013A MCU.
  ☆26Updated 11 years ago
• howie-j / opensolder
  Fully open source JBC T245-compatible soldering station
  ☆35Updated 2 years ago
• kodizhuk / Salae-Logic-NEC-Analyzer
  NEC IR remote protocol analyzer for Salae Logic
  ☆18Updated 5 years ago
• cbm80amiga / ST7735_SDMediaPlayer
  SD File Browser and Viewer
  ☆47Updated 4 years ago
• maxxproff / avrdude-ch341
  avrdude with ch341a programmer support (fullspeed and bitbang) for Windows WCH official driver and Linux (based on Alexey Sadkov patch an…
  ☆12Updated 2 years ago
• wagiminator / ATtiny85-TinyLoad
  Electronic Dummy Load
  ☆52Updated 3 years ago
• wuhoude / superCapacity
  熨斗热台代码
  ☆17Updated 4 years ago
• sfrwmaker / hakko_t12
  The hakko T12 digital controller on atmega328
  ☆68Updated 4 years ago
• SoCXin / N76E003
  L1 R1: Nuvoton 8051 MCU (N76E003)
  ☆19Updated 4 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 5 years ago
• wagiminator / ATtiny85-USB-C-Tester
  Simple USB-C Power Delivery Tester
  ☆40Updated 3 years ago
• lujji / esp-stm8-flasher
  ESP8266 application for flashing STM8S via stm8-bootloader
  ☆31Updated 8 years ago
• WeActStudio / WeActStudio.MiniSTM32H7B0
  STM32H7B0VBT6 Core Board 280Mhz,128KB ROM,1.4M SRAM
  ☆17Updated 3 years ago
• timothyjager / JBC-Soldering-Controller
  A DIY soldering controller for JBC T245 handle & C245 tips
  ☆42Updated 2 years ago
• LGTMCU / LarduinoISP
  make arduino board to be LGT8FX8D/P programmer
  ☆70Updated 4 years ago
• nulllaborg / nulllab_w80x_arduino
  w806 for arduino ide package
  ☆38Updated 4 years ago